Avocent DSR1021 manual To set the Screen Saver options

38DSR1021/1022 Switch Installer/User Guide

Figure 3.13: Screen Saver Dialog Box

To set the Screen Saver options:

NOTE: The Screen Saver password is set within the DSView 3 software. For more information, see the DSView Installer/User Guide.

1.Type the number of minutes for Inactivity Time (1-99) to delay activation of the password protection and screen saver features.

2.For Mode, select Energy if your monitor is ENERGY STAR® compliant; otherwise, select Screen.

CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with

ENERGY STAR®.

3.(Optional) Click Test to activate the screen saver test which lasts 10 seconds and then returns to the Security dialog box.

4.Click OK to save settings.

To exit Screen Saver mode and log in to the local port:

1.Press any key or move the mouse.

2.If Screen Saver security was turned on in the DSView 3 software, a login screen appears. Enter your username and password and then click OK. If you do not know your username and password, see the DSView 3 software administrator.

3.The Main dialog box appears and any previous target device connection is restored.