4.Insert both of the supplied keys to the slots at the left and right sides of the stereo. Press the keys downward, and slide the sleeve off of the stereo.
Note:
The keys are labeled to show their top edges.
5.Insert the sleeve into the dash. Then secure the sleeve to the dash by bending out the appropriate tabs with a screwdriver. Bend out all the side tabs.
6.Slide the stereo into the sleeve until it locks into place.
(new illus)
7.If your vehicle has a suitable mounting hole under the dash, use pliers or a
8.Reconnect the wire harness and the antenna.
9.Reconnect the cable to the vehicle battery's negative
10.If you are securing the stereo to an existing mounting hole under the dash, push the supplied rubber mounting grommet onto the mounting bolt, then push the mounting bolt (covered by the mounting grommet) through the existing mounting hole then slide it to the left or right to secure it.
Otherwise, you can use one of the supplied bolts (with attached washer) to attach one end of the supplied metal strap to the mounting hole on the back of the stereo. If necessary, bend the metal strap to fit your vehicle's mounting area. Then use either the supplied sheet metal screws or the other bolt (with attached washer) to attach the other end of the strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the stereo.
REMOVING THE STEREO FROM THE DASH
If you ever want to remove the stereo from the dash, follow these steps.
1. Disconnect the cable from the vehicle battery's negative