Cable Electronics HSW44C Performance rating Type of LAN cable Wiring Shielding, CAT5e

Page 20

Notice

1.If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information.

2.All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.

3.The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable 300m/1000ft form) can transmit a lot longer signals than stranded LAN cables (usually in patch cord form). Shielded STP cables are better suit than unshielded UTP cables. A solid UTP CAT5e cable shows longer transmission length than stranded STP CAT6 cable. For long extension users, solid LAN cables are your only choice.

4.EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance.

5.To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use shielded LAN cables to improve EMI problems, which is worsen in long transmission.

6.Because the quality of the LAN cables has the major effects in how long transmission distance will be made and how good is the received display, the actual transmission length is subject to your LAN cables. For resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended.

7.If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1] generally can produce better transmission performance among all HDMI inputs.

8.The HSMR has been tested extensively and found that it doesn’t require external power supply. If in rare situation you find it cannot work with the HSW44C, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.

9.Additional IR remote controls and IR emitter cables can be purchased as optional accessories to control the HDMI sources located separately.

Performance Guide for HDMI over LAN Cable Transmission

 

Performance rating

 

Type of LAN cable

 

 

 

 

 

Wiring

 

Shielding

CAT5

CAT5e

CAT6

 

Solid

 

Unshielded (UTP)

￿￿￿

￿￿￿￿

￿￿￿￿￿

 

 

Shielded (STP)

￿￿￿

￿￿￿

￿￿￿￿

 

 

 

 

Stranded

 

Unshielded (UTP)

￿

￿￿

￿￿

 

 

Shielded (STP)

￿

￿

￿￿

 

 

 

 

 

Termination

Please use EIA/TIA-568-Btermination (T568B) at any time

19

Image 20
Contents HSW44C Safety and Notice Introduction Features Specifications & Package ContentsPackage Contents MechanicalPanel Descriptions HSW44CHsmr DIP Switch DIP Switch Position Video Audio Description Pin#1 Pin#2 OFFSW Main for firmware update for technical support only IR Sockets IR ExtenderIR Cables Data Format Suitable Not Recommended Definition of IR Earphone JackSupported IR Data Format Hsmr as receiver Hardware InstallationHSW44C as master Operation and IR Control Source SideMethod B1 IR remote control for switching input channels Display SideRS-232 Serial Port Control Method C Software Control through RS-232Page 0x01 ~ 0xFF RS-232 CommandsCheck sum Firmware Update Please execute the file MatrixFirmwareUpdate.exePage Termination Performance rating Type of LAN cable Wiring ShieldingCAT5e Warranty