Cable Electronics HSW44C instruction manual Mechanical, Package Contents

PCB stack-up		4-layer board [impedance control — differential 100Ω; single 50Ω]
		4x HDMI				1x RJ-45 TMDS
Input						1x RJ-45 DDC
		1x RS-232
						1x IR socket for IR receiver
		4x RJ-45 TMDS
Output		4x RJ-45 DDC				1x HDMI
		5x IR socket for IR emitter
HDMI Input selection		Push button / IR remote / RS-232				Push button / IR remote
HDMI source control		Controllable through IR control path from IR receiver at receiver sites
IR remote control		Electro-optical characteristics: τ = 25° / Carrier frequency: 38kHz
HDMI connector			Type A [19-pin female]
RJ-45 connector		WE/SS 8P8C with 2 LED indicators [TMDS & DDC channels]
RS-232 connector			DE-9 [9-pin D-sub female]
		Earphone jack for IR emitter cable				Earphone jack for IR receiver cable
3.5mm connector		[IR Main] All sources IR control
						[IR] Receives IR control
		[IR1~IR4] Individual channel IR control
DIP switch		[SW1~SW4] 2-pin for EDID, audio mode & safe mode
[for MA-5144 only]		[SW Main] 4-pin operation mode & firmware update
Mechanical		HSW44C				HSMR
Housing			Metal case
Dimensions	Model	1’1.4”x4.3”x1.7”	[340 x 110 x 44mm]			3.3”x3.5”x1”	[85 x 90 x 25mm]
	Package		1’9.5”x9.1”x4.3”	[545 x 230 x 110mm]
(L x W x H)
	Carton		1’10.5”x1’10.9”x10.2”			[570 x 580 x 260mm]
Weight	Model	2.7 lbs	[1220g]			6.3 oz	[180g]
	Package		7.0 lbs	[3.2 kg]
Fixedness		1U rack-mount with ears				Wall-mount with screws
		Wall hanging holes
Power supply		5V 6A DC				Not necessarily required1
Power consumption		20 Watts [max]			1 Watt [max] (provided by HSW44C)
Operation temperature			0~40°C [32~104°F]
Storage temperature			-20~60°C [-4~140°F]
Relative humidity			20~90% RH [no condensation]
		1x HSW44C				4x HSMR
		1x IR emitter cable2				4x IR receiver cable
Package Contents		2x Rack-mounting ears				8x Wall-mounting screws
		1x IR remote2				1x 5V 6A power adapter
		1x User Manual

1The HSMR has been tested extensively and found that it doesn’t require external power supply. If in rare situation you find it cannot work with the HSW44C, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.

2Additional IR remote control and IR emitter cable can be purchased as optional accessories to control the HDMI sources located separately.

4