HS103 Operating Instructionsٻ
CONNECTION AND OPERATION
1)Connect the HDMI sources (such as:
2)Connect the HDMI display (such as:
3)Power on the the input source you want to show. Turn off unused sources as this will speed up the automatic switching.
4)Power on the display
Remark Manual selection button can be used when the user want to select the source manually.
*SmartFunction: Whentherearearemorethanoneonesourceconnectedstotothetheswitch,the, The user should leave thea desiredsourceon,on,thetheothersothersoffoff. The. Thenthe theswitchswitchwill choosewill choosethis this sourceautomaticallyandandsendingthehesignaltotothedisplal y. If severalsourcesareareallallpowered on,poweredthe laston,poweredthe last sourcepoweredwillsourcebe chosenwill be. Becausechosen.ofBeacusethis function,character,of this function,ser couldtheuseuserthe methodcould useof powerthe methoff/odn ofthepowersourceoff/onto chotoselectthe desiredthe desiredsignalsignal. .
Insert / Extract cables gently.
SPECIFICATIONS
|
|
Operating Temperature Range | |
Operating Humidity Range | 5 to 90 % RH (no condensation) |
Input Video Signal | |
Input DDC Signal | 5 volts |
Video Format Supported | DTV/HDTV:1080p/1080i/720p/576p/480p |
| /576i/480i |
Signaling Rates | 2.25Gbits x 3 |
Output Video | HDMI1.3 |
Maximum Transmission Distance | <20m (AWG28 HDMI cable) |
Dimensions | 62mmW×62mmH×19mmD |
| /2.4’’W×2.4’’H×0.7''D |
Mass( Main unit ) | 40gs/0.08lb |
*Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
5