Atlantis Land AO2-F5P manual

Ports 1-5(8)At the rear site of the Switch, ports 1-5(8) are where you will connect your Computers to the Switch

Power At the left site of the Switch, the power port is where you will connect the AC power adapter. Be sure to only use the AC power adapter that came with the Switch.

The 5 UTP/STP ports support automatic MDI/MDIX crossover detection function gives

true ‘plug and play’ capability, with the Auto-MDI function, you just need to plug-in the network cable to the switch directly and no need to care if the end node is NIC

(Network Interface Card) or switches and hubs.

Connect the Switch’s AC power adapter to the Switch’s Power port. Plug the other end of the

adapter into an AC outlet. When connected the AC power adapter to the switch’s Power port and AC outlet will immediately power on this Switch.