AVE RS-485 operation manual LED Status Indication, Cable Connections

Page 6

LED STATUS INDICATION

The front panel of the unit has 3 LED indicators - one to show when power is connected and two to indicate the status of the device as follows:

When the unit is powered up, it performs a self-test, status light B will illuminate to indicate the test has completed successfully and that the unit is functioning correctly. Status light A will flash whenever data is received at the RS485 input.

Cable Connections

 

Hydra

PC/DVR

VSI-Pro

DB9M

DB9F

DB9M

GND 5

------------------ 5 GND ---------------

5 GND

TXD 3

------------------ 2 RXD ---------------

2 RXD

The Hydra output protocol is commonly called “VSI-ADD”. Therefore when connecting to a VSI-Pro select this format in the register selection menu. When using an AVE DVR select this format when configuring the RS-232 and Text Insertion menus.

6

Image 6
Contents Hydra Page Contents SpecificationsNetwork Diagram IntroductionConnections Regcom Rear PanelLED Status Indication Cable ConnectionsLimited Warranty North America