Asante Technologies 3524 Series manual Recommended Installation Tools, Power Requirements

Page 10

Do not tamper with the internal components of your switch. This could void your warranty

Examine your work area for potential hazards (I.e. wet floors, ungrounded cables, etc.) and eliminate them before installing your switch

For more safety information, please refer to the User’s Manual.

2.2 Recommended Installation Tools

You will need the following tools and equip- ment (not included) to install the switch:

Number 1 Phillips screwdriver

Number 2 Phillips screwdriver

3/16-inch flat-blade screwdriver

Antistatic mat or foam

An ESD grounding strap

2.3 Power Requirements

The electrical outlet should be located near the switch and be easily accessible. It must also be properly grounded.

Make sure the power source adheres to the following guidelines:

Power: Auto Switching 110/240 VAC

Frequency range: 50/60 Hz

Maximum input AC Current: 1.0A at 115 VAC full load

2.4Environmental Requirements

The switch must be installed in a clean, dry, dust-free area with adequate air circulation to maintain the following environ- mental limits:

Operating Temperature: 0° to 40° C (32° to 104° F)

Storage Temperature: -20° to 70° C (-4° to 158° F)

Relative Humidity: 10% to 90% relative humidity

Storage Relative Humidity: 10% to 95% relative humidity

10

Getting Started Guide

 

Image 10
Contents IntraCore 3524 Series Getting Started GuideQuick Start Guide Table of Contents Getting Started Guide Introduction IntraCore 3524 SeriesPackage Contents LEDsLED Front Panel Description Front Panel IC 3524 BaseInstallation and Setup Safety OverviewPower Requirements Recommended Installation ToolsEnvironmental Requirements Installation in an Equipment Rack Installation OverviewChassis Installation/Placement Cooling and AirflowFree-Standing/Desktop Placement Equipment Rack GuidelinesInstalling a Gbic Installing Gbic InterfacesRemoving a Gbic Installing Optional Hardware Modules Gbic Care and HandlingConnecting to the Network Connecting Power11.1 10/100BaseTX Ports Cabling Procedures Pin Number Pair Number & Wire Colors Using the Stacking Feature Gigabit Ethernet Ports Cabling ProceduresGetting Started Guide Command Getting Started Guide Appendix a Troubleshooting Getting Started Guide Appendix B Safety and Regulatory Com- pliance FCC Compliance Statement Safety AdvisoryGetting Started Guide Features Appendix C Features and SpecificationsSpecifications Getting Started Guide Pin Number Signal Name Appendix D Serial Port Pin OutsGetting Started Guide Appendix E Warranty and Support Getting Started Guide Asanté IntraCore USA

3524 Series specifications

Asante Technologies 3524 Series represents a robust solution for organizations seeking reliable performance in network switching. This series is particularly designed to accommodate the growing demands of modern networking environments, making it a compelling option for both small and medium-sized businesses.

At the heart of the Asante 3524 Series is its extensive port configuration. The series typically offers 24 10/100/1000 Mbps Ethernet ports, allowing for high-speed connectivity for a variety of devices. This high-density switching capability ensures that businesses can seamlessly connect numerous devices, from workstations to printers and IP cameras, all while maintaining optimal performance.

One of the standout features of the Asante 3524 Series is its support for Power over Ethernet (PoE). This technology enables the switch to deliver both data and power over the same Ethernet cable, simplifying installation and reducing cable clutter. This is particularly beneficial for devices like VoIP phones and security cameras that require both power and data connections. By leveraging PoE, organizations can enhance flexibility in device placement, minimizing the need for additional power outlets.

The series also offers advanced Layer 2 switching capabilities, which include VLAN support. Virtual Local Area Networks (VLANs) allow for network segmentation, improving security and performance by isolating different network segments. This feature is essential for businesses aiming to enhance their network's organization while also ensuring that sensitive data remains secure.

Another notable characteristic of the Asante 3524 Series is its web-based management interface. This user-friendly interface simplifies configuration and monitoring tasks, enabling network administrators to manage the switch efficiently. Additionally, the series supports SNMP (Simple Network Management Protocol), which allows for more advanced monitoring and management through compatible software.

Durability and reliability are key attributes of the Asante 3524 Series. Designed for continuous operation, these switches are built with high-quality components to ensure longevity even under demanding conditions. This reliability makes it an excellent choice for organizations that require 24/7 uptime for their critical network operations.

In summary, the Asante Technologies 3524 Series is an ideal choice for businesses seeking a powerful, reliable, and feature-rich switching solution. With its extensive port configuration, PoE support, VLAN capabilities, and user-friendly management, this series stands out as a valuable asset in today’s increasingly connected world.