Asante Technologies 3524 Series manual Installation and Setup, Safety Overview

Page 9

2 Installation and Setup

This chapter explains how to install and connect the switch to your network. To configure the switch for management, refer to the User’s Manual on the CD-ROM.

The following guidelines will help you prepare to install the switch in such a way that it has the proper power supply and environment.

2.1 Safety Overview

The following information provides safety guidelines to ensure your safety and to protect the switch from damage.

Note: Be aware, however, that this information is intended as a guideline, and may not include every possible hazard to which you may be exposed. Use caution when installing this switch.

•Only trained and qualified personnel should be allowed to in- stall or replace this equipment.

•Always use caution when lifting heavy equipment

•Keep the chassis clean

•Keep tools and chassis components off the floor and away from foot traffic

•Avoid wearing rings or chains (or other jewelry) that could get caught in the chassis. Metal objects can heat up and cause serious injury to persons and damage to the equipment. Avoid wearing loose clothing, i.e. ties or sleeves

When working with electricity, follow these guidelines:

•Before accessing the interior of the chassis, locate

the emergency power-off switch for the room you are in

•Disconnect all external cables before installing or removing a chassis

•Do not work alone when working with electricity

•Always check that the power has been disconnected from the circuit

Asanté IntraCore 3524

9

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Getting Started Guide IntraCore 3524 SeriesQuick Start Guide Table of Contents Getting Started Guide IntraCore 3524 Series IntroductionLEDs Package ContentsLED Front Panel IC 3524 Base Front Panel DescriptionSafety Overview Installation and SetupRecommended Installation Tools Power RequirementsEnvironmental Requirements Chassis Installation/Placement Installation OverviewInstallation in an Equipment Rack Cooling and AirflowEquipment Rack Guidelines Free-Standing/Desktop PlacementInstalling Gbic Interfaces Installing a GbicRemoving a Gbic Gbic Care and Handling Installing Optional Hardware ModulesConnecting Power Connecting to the Network11.1 10/100BaseTX Ports Cabling Procedures Pin Number Pair Number & Wire Colors Gigabit Ethernet Ports Cabling Procedures Using the Stacking FeatureGetting Started Guide Command Getting Started Guide Appendix a Troubleshooting Getting Started Guide FCC Compliance Statement Safety Advisory Appendix B Safety and Regulatory Com- plianceGetting Started Guide Appendix C Features and Specifications FeaturesSpecifications Getting Started Guide Appendix D Serial Port Pin Outs Pin Number Signal NameGetting Started Guide Appendix E Warranty and Support Getting Started Guide Asanté IntraCore USA

3524 Series specifications

Asante Technologies 3524 Series represents a robust solution for organizations seeking reliable performance in network switching. This series is particularly designed to accommodate the growing demands of modern networking environments, making it a compelling option for both small and medium-sized businesses.

At the heart of the Asante 3524 Series is its extensive port configuration. The series typically offers 24 10/100/1000 Mbps Ethernet ports, allowing for high-speed connectivity for a variety of devices. This high-density switching capability ensures that businesses can seamlessly connect numerous devices, from workstations to printers and IP cameras, all while maintaining optimal performance.

One of the standout features of the Asante 3524 Series is its support for Power over Ethernet (PoE). This technology enables the switch to deliver both data and power over the same Ethernet cable, simplifying installation and reducing cable clutter. This is particularly beneficial for devices like VoIP phones and security cameras that require both power and data connections. By leveraging PoE, organizations can enhance flexibility in device placement, minimizing the need for additional power outlets.

The series also offers advanced Layer 2 switching capabilities, which include VLAN support. Virtual Local Area Networks (VLANs) allow for network segmentation, improving security and performance by isolating different network segments. This feature is essential for businesses aiming to enhance their network's organization while also ensuring that sensitive data remains secure.

Another notable characteristic of the Asante 3524 Series is its web-based management interface. This user-friendly interface simplifies configuration and monitoring tasks, enabling network administrators to manage the switch efficiently. Additionally, the series supports SNMP (Simple Network Management Protocol), which allows for more advanced monitoring and management through compatible software.

Durability and reliability are key attributes of the Asante 3524 Series. Designed for continuous operation, these switches are built with high-quality components to ensure longevity even under demanding conditions. This reliability makes it an excellent choice for organizations that require 24/7 uptime for their critical network operations.

In summary, the Asante Technologies 3524 Series is an ideal choice for businesses seeking a powerful, reliable, and feature-rich switching solution. With its extensive port configuration, PoE support, VLAN capabilities, and user-friendly management, this series stands out as a valuable asset in today’s increasingly connected world.
Top Page Image Contents