Asante Technologies Wireless USB Adapter user manual Windows Troubleshooting

Page 41

Chapter 8. Windows Troubleshooting

This chapter provides basic troubleshooting tips when using the Asanté Bluetooth software with Windows.

1. Cannot connect to a paired device

Paired devices are always displayed in My Bluetooth Places, even if the remote device is out of range or not powered up.

Verify that the remote member of the pair is within radio range and powered up and then attempt the connection again.

2. Cannot discover services on an un-paired remote device

The remote device may not be powered up or may be out of range. Verify that the remote device is powered up.

Verify that the remote device is in Connectable mode (Bluetooth Configuration Panel > Accessibility tab).

Perform a Search for Devices to verify that the device is within range.

3.Dial-up Networking service does not start

•The Dial-up Networking service will not start unless a properly configured modem is attached to the server.

•Verify that the modem is usable as a local device from the server.

•In the Bluetooth Configuration Panel choose the Local Services tab. Double-click Dial-up Networking service. Click the down arrow in the Modem field and select the modem that will be used to dial out. Click the OK button twice to close the Bluetooth Configuration Panel.

4.How do I determine the Bluetooth Device Address (BDA) of my hardware device?

•In the Bluetooth Configuration Panel, on the Hardware tab, in the Devices section, select the device you want to determine the address of. In the Device Properties section of the dialog box, the fourth entry, Device Address, is the BDA of the selected Bluetooth device.

5.How do I determine the version number of the Bluetooth Specification that the Host Controller Interface (HCI) complies with?

•In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Properties section, the fifth entry provides Bluetooth Specification compliance information for the Host Controller Interface.

•The sixth entry contains the Specification Revision information for the Host Controller Interface, if appropriate.

6.How do I determine the version number of the Link Manager Protocol (LMP)?

•In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Properties section, the seventh entry provides Link Manager Protocol version number information.

•The eighth entry contains the Link Manager Protocol sub-version number information, if appropriate.

7.How Do I find information about the Bluetooth hardware attached to my computer?

•In the Bluetooth Configuration Panel, select the Hardware tab.

Asanté FBT100 User’s Guide

11/12/02 Edition

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents FriendlyNET Bluetooth Worldwide FriendlyNET BluetoothTable of Contents Introduction KEY Specifications Macintosh OS X Feature Tour Receiving Files Serial Ports Click on the New… button to add a new pair File Transfer Isync Configuring Bluetooth General TAB Accessibility Discovery Information Exchange Local Services Client Applications Hardware Version Info Notifications Bluetooth Neighborhood Find a Service Asanté FBT100 User’s Guide 11/12/02 Edition Connection Status Service Properties Bluetooth Connection Wizard Asanté FBT100 User’s Guide 11/12/02 Edition Asanté FBT100 User’s Guide 11/12/02 Edition Business Card Exchange Bluetooth ServicesBluetooth Serial Port DIAL-UP Networking File Transfer Network Access Select Specify an IP address Administration.…Select Enable Dhcp Server Information Synchronization Windows Security Encryption Asanté FBT100 User’s Guide 11/12/02 Edition Passkey Click the Authorize or Authenticate button Cannot discover services on an un-paired remote device Windows TroubleshootingDial-up Networking service does not start Cannot connect to a paired deviceHow do I test a Network Access connection? Appendix A. Glossary of Terms Appendix B. Learning More About Bluetooth
Top Page Image Contents