Atlantis Land A02-WAP-54G quick start Fly Wireless Access Point, Package contents, Cabling

Page 2

I-Fly Wireless Access Point

For more detailed instructions on configuring and using the I- Storm Lan Router ADSL, please refer to the online manual.

1.1 Package contents

Make sure that you have the following items:

•I-Fly Wireless Access Point

•Network cable (CAT 5)

•Power Adapter AC-DC (5V, 2A)

•CD-ROM (with manual, software and driver)

•This Quick Start Guide

If any of the above items are missing, please contact your reseller.

1.2 Cabling

Connect to RJ45 ports by an Ethernet cable your PCs or Switch. Finally connect the Adapter to power inlet. Now the I-Fly AP will enter a self-test phase for about ten seconds. After this phase a solid light (POWER Led) indicates a proper connection to the power supply.Now you should see the LAN (WLAN) is solid or blinking.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Fly Wireless Access Point Quick Start Guide Cabling Fly Wireless Access PointPackage contents Fly Wireless Access Point Front Panel LEDs IE Configuration Fly Wireless Access Point Rear PortsDefault Settings Browser configuration Fly Wireless Access Point Quick Setup with Wizard Set Ssid and channel Restart Click Close to finish the AP Wizard
Top Page Image Contents