Atlantis Land 899 A02-WR-54G ME01 user manual Advanced, 3.4

Page 28

3.8.2.3 Advanced

This screen enables you to configure advanced wireless functions.

Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The default beacon interval is 100.

RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until data flow is normalized. Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error rates are high, choose values between 256 and 2432 until packet transfer rates are minimized. (NOTE: set this fragmentation threshold value may diminish system performance.)

DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box. You can specify a value between 1 and 65535. The default value is 3.

TX Rates (MBps): Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the speed of wireless adapters connected to the WLAN.

11g only mode: enable or disable.

Antenna Power Transmit: Select the Antenna Power transmit for wireless interface.

SuperG: Enable SuperG for superior performance

3.2.3.4 802.1x

There are three essential components to the 802.1x infrastructure: (1) Supplicant, (2) Authenticator and (3) Server. The Router serves as an Authenticator, and the EAP methods used must be supported by the backend Radius Server. The 802.1x security supports both MD5 and TLS Extensive Authentication Protocol (EAP). Please follow the steps below to configure 802.1X security.

1.Enable 802.1X security by selecting “Enable”.

2.Select the Encryption Key Length Size ranging from 64 to 128 Bits that you would like to use.

Select the Lifetime of the Encryption Key from 5 Minutes to 1 Day. As soon as the lifetime of the Encryption Key is over, the Encryption Key will be renewed by the Radius server.

3.Enter the IP address of and the Port used by the Primary Radius Server Enter the Shared Secret, which is used by the Radius Server.

4.Enter the IP address of, Port and Shared Secret used by the Secondary Radius Server. (Click “Help” to get interpretation for Encryption Key and Radius Server.)

5.Click “Apply” button for the 802.1x settings to take effect after Wireless router reboots itself.

Image 28
Contents Fly Wireless Broadband Router Copyright DisclaimerFCC Warning CE Mark WarningIndex Access An Overview of the I-Fly Wireless Broadband Router IntroductionPackage Contents Fly Wireless Broadband Router FeaturesFly Wireless Broadband Router Application System RequirementsPage LED Meaning Power Front LEDsStatus WANReset Rear PortsCabling Port Meaning LANBefore Configuration Connecting the I-Fly Wireless Broadband RouterFor Windows 95/98/ME Configuring PC in WindowsClick Properties Page For Windows NT4.0 For Windows Click OK to finish the configuration For Windows XP Click OK to finish the configuration Configuring Internet Explorer Test TCP/IPPing Pinging 192.168.1.1 with 32 bytes of data Request timed outReset Factory Default SettingsLAN and WAN Port Addresses Configurazione del Router tramite Browser LAN Settings 1.1 LAN&DHCP Server1.2 WAN Connection Type Password Wireless TimeDynamic DNS BasicAuthentication Advanced 3.4Status Device Information3.2 Log Log Setting Statistics WirelessStatic Dynamic Access Routing TableFilter MAC FilterURL Blocking IP FilterProtocol Filter Domain Blocking Virtual Server Application Outgoing Ingoing Page Special AP 5.4 DMZ Firewall RuleSnmp ManagementRemote Management Tools ∙ Enable/DisableRestart Firmware Ping TestQuick Setup with Wizard Set your new PasswordChoose your time zone Set LAN connection and Dhcp serverObtain IP automatically Dhcp client Set Internet connectionFixed IP Address PPPoE to obtain IP automatically PPPoE with a fixed IP address Pptp Set Wireless LAN connection Technical Features Support Internet Application Package contentsPhysical and Environmental Glossary DMZDhcp DNSFTP Http IcmpISP MTUNTP NATRIP RTS SmtpTCP TCP/IPAppendix D Support