Atlantis Land A02-F8-2C/M2 manual Rear Panel, LED Indicators

Page 15

Rear Panel

The rear panel of the Switch consists of an AC power connector. The following shows the rear panel of the Switch.

Figure 3-2. Rear panel view of the 10-port 10/100/1000Mbps Gigabit

Ethernet Switch

♦AC Power Connector This is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz.

LED Indicators

The LED indicators of the Switch include Power, SPEED, LINK/ACT and FDX/COL. The following shows the LED indicators for the Switch along with an explanation of each indicator.

Image 15

Contents USER’S Guide CE Mark Warning FCC WarningTable of Contents Technical SpecificationsPage Terms Overview of this User’s GuideAbout this Guide Introduction Gigabit Ethernet TechnologyFast Ethernet Technology Switching Technology Ports FeaturesSetup Unpacking and SetupUnpacking Gigabit Ethernet Switch installed on a Desktop or Shelf Desktop or Shelf Installation2A. Attaching the mounting brackets to the Switch Rack Installation optionalPower on Connecting Network CableIdentifying External Components Front PanelRear Panel LED IndicatorsPage Product Support Technical SpecificationsCSMA/CD Physical and Environmental