Aube Technologies TI032-3W manual Applications, Installation, Power-On, Setting the Clock

Page 1
Line
120 VAC
SINGLE-POLE INSTALLATION
Line
120 VAC
Neutral
NOTE A:
The white wire is not the neutral wire but the wire going to the load.
See NOTE A

nApplications

The TI032-3W switch can be used in a single-pole or 3-way installation with the following types of lighting:

Incandescent

Halogen

Low-voltage halogen with transformer

Fluorescent

The TI032-3W switch cannot be used with a load below 40 W or above 500 W.

oInstallation

nCut power at the circuit breaker to avoid electric shock.

TI032-3W

Installation and User Guide

Programmable Wall Switch

NEW 3-WAY INSTALLATION

120 VAC

See NOTE A

 

The jumper wire is not required in this installation. A single-pole switch can be used as the other switch in a 3-way installation.

oRemove the existing switch. (For a 3-way installation, identify and label the wire that is connected to the “common” screw.)

pInstall the new switch (refer to the appropriate section below). q Apply power at the circuit breaker.

pPower-On

nPry the switch door open from the bottom using a small screwdriver.

oEnsure the ON/OFF selector is set to ON.

pReset the switch using a paper clip. 0:00 and MO will flash.

If the display is blank:

Reset

Control (4)

On/Off selector

Neutral

Connect wires "2" and "C" of the TI032-3W to the line (120 V) wire.

EXISTING 3-WAY INSTALLATION

120 VAC

See NOTE A

Red

Jumper

Red

3-wire cable

 

 

Connect wire "C" of the TI032-3W to the "common" wire, identified when removing the old switch. Connect the other two TI032-3W wires to the two remaining wires.

At the other 3-way switch, connect the jumper wire between the "com- mon" screw and the screw where wire "1" of the TI032-3W is connected.

Ensure the ON/OFF selector is properly engaged in the ON posi- tion. Push it to the right using a small screwdriver.

If the programmable switch controls a lamp equipped with a built-in On/Off switch, ensure the lamp switch is set to On.

Ensure the light bulb is not burned out and is tightly screwed in its socket.

EXISTING 3-WAY INSTALLATION

If either switch does not work properly, rewire the jumper between the "common" screw and the other screw.

WARNING: Before replacing the light bulb, place the ON/OFF selector in the OFF position. Failure to do so might damage the switch.

qSetting the Clock

NOTE: The switch displays the time in 24-hour format by default or following a reset.

nTo change to 12-hour format (or vice versa), proceed as follows:

a)Press one of the control buttons to ensure the MAN or AUTO indicator is displayed.

b)Press the MIN and HOUR buttons simultaneously and brief- tly (0:00 display = 24-hour, 12:00 display = 12-hour ).

oSet the time using the HOUR and MIN buttons. If you have selected the 12-hour format, ensure that PM appears on the screen when an afternoon time is displayed.

pSet the day by using the DAY button.

qPress one of the control buttons or close the switch door to return to normal operation.

TI032-3W

400-032-001-B

30/11/06

1/2

Image 1
Contents Power-On InstallationSetting the Clock ApplicationsTechnical Specifications Selecting the Operating ModeTroubleshooting Warranty

TI032-3W specifications

Aube Technologies, a leader in advanced heating and cooling solutions, offers the TI032-3W, a versatile and innovative programmable thermostat designed for enhancing energy efficiency and comfort in various residential settings. This model is particularly popular for its reliability and user-friendly features, making it an ideal choice for those looking to optimize their home climate control.

One of the standout features of the TI032-3W is its programmable capability. Homeowners can easily set schedules for heating and cooling, allowing for customized temperature settings based on daily routines. This not only enhances comfort but also promotes significant energy savings, as the system can be programmed to reduce energy usage when occupants are away from home, and optimize heating or cooling just before they return.

The TI032-3W is equipped with a large, clear LCD display that provides easy readability even from a distance. This display features intuitive navigation, making it simple for users to adjust settings. Furthermore, the thermostat offers multiple language options, catering to a diverse user base and ensuring that everyone can operate it effectively.

In terms of technology, the TI032-3W integrates advanced sensor technology that monitors the home’s temperature and adjusts it accordingly. This ensures that the environment remains consistently comfortable without unnecessary energy consumption. Additionally, the model includes a 7-day programming option, allowing for personalized settings for each day of the week.

The thermostat is also compatible with a variety of HVAC systems, including electric heating, hot water heating, and cooling systems, making it a flexible choice for homeowners. Its compatibility signifies the ease with which the TI032-3W can be integrated into existing systems, providing seamless upgrades without the need for extensive modifications.

Durability and energy efficiency are other key characteristics of the TI032-3W. The model is designed to withstand the rigors of daily use while maintaining optimal performance over time. It adheres to energy efficiency guidelines, further benefiting users by lowering utility bills and reducing the environmental impact.

In conclusion, the Aube Technologies TI032-3W is an exceptional programmable thermostat that combines advanced features, user-friendly technology, and compatibility with various heating and cooling systems. With its energy-saving capabilities and focus on comfort, it stands out as a reliable choice for any homeowner seeking to enhance their living environment.