rSelecting the Operating Mode
The programmable switch has 2 operating modes: manual (MAN) and automatic (AUTO). To switch mode, press the switch door for 3 seconds.
Manual Mode
The programmable switch operates as a regular switch. Briefly press the switch door to turn the lights On or Off. The mode (MAN) and state (ON or OFF) are displayed.
Automatic Mode
The programmable switch follows the programmed
schedule. The mode (AUTO), state (ON or OFF) and current program number are displayed. To temporarily override the programmed schedule,
press the switch door. The new state (ON or OFF) will
flash to show that this state is temporary. The override remains in effect until you press the switch door again or until the beginning of the next program.
sProgramming
You can set up to 7 programs. To set a program, you need to enter its start time (ON) and its end time (OFF).
nPry the switch door open using a small screwdriver.
oPress the PGM button to display a program and its
On or Off time. For example, when you first press PGM, program number 1 (P1) and its On time (ON) will appear. - : - - will appear instead of the time if the program is not set (inactive).
pPress the DAY button to select the day to which
you want to apply the program.
NOTE: If you want to apply the program to every day of the week, press DAY until all the days are displayed. (This still counts as 1 program, not 7)
qPress the HOUR and MIN buttons to set the ON time (time when you want the lights to turn on). If you have selected the 12-hour format, ensure that PM appears on the screen when an afternoon time is displayed.
rAfter you have programmed the ON time, press the PGM button to display the OFF time (time when you want the lights to turn off).
sRepeat steps 3 through 5 to program the OFF
time. If the program ON time is set for every day of the week, the program OFF time will automatically be set for every day.
tTo set another program, repeat steps 2 through 6. Programs that are not set will remain inactive.
uPress one of the control buttons or close the switch door to return to normal operation.
Clearing a Program
Press the PGM button until the desired program is selected. Hold the PGM button for 3 seconds. - : - - appears when the program is erased.
tTechnical Specifications
Supply: 120 VAC, 50 / 60 Hz
Minimum load: 40 watts
Maximum load: 500 watts
Operating temperature range: 5°F to 122°F (-15°C to 50°C)
Storage temperature range: -4°F to 122°F (-20°C to 50°C)
Power outage: The programs are protected by a rechargeable battery. The screen is blank during the power outage.
Certifications: CSA & UL
TI032-3W
uTroubleshooting
Blank display | • Verify circuit breaker at main panel. |
| • Verify if light bulb is burned out |
| • Ensure the ON/OFF selector is at ON. |
| • Reset the switch using a paper clip. |
Faded or irregular | • Load is less than 40 W |
display | • Ambient temperature is below freezing |
| point |
| |
Cannot switch between | First, press one of the control buttons so |
24-hour format and | that MAN or AUTO appears on display. |
12-hour format | |
| |
Programs do not run as | • Make sure the switch is properly pro- |
expected | grammed. |
| • Note that - : - - indicates an inactive pro- |
| gram, 00:00 indicates midnight. |
| • If the switch has been configured for |
| 12-hour format, check that PM appears on |
| the left side of the screen when an after- |
| noon time is displayed. |
| |
The metal plate is hot | This is normal with high loads (maximum of |
| 500 W). |
| |
;Warranty
AUBE warrants this product, excluding battery, to be free from defects in the work- manship or materials, under normal use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, AUBE shall repair or replace it (at AUBE's option).
If the product is defective,
(i)return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or
(ii)contact AUBE. AUBE will make the determination whether the product should be returned, or whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by AUBE that the defect or malfunction was caused by dam- age which occurred while the product was in the possession of a consumer.
AUBE's sole responsibility shall be to repair or replace the product within the terms stated above. AUBE SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WAR- RANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PROD- UCT. Some provinces, states or regions do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY AUBE MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE THREE-YEAR DURATION OF THIS WARRANTY. Some provinces, states or regions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which vary from one province, state or region to another.
Customer Assistance
If you have any questions on the product installation or operation, contact us at:
705 Montrichard Avenue Saint-Jean-sur-Richelieu, Quebec J2X 5K8
Canada
Tel.: (450) 358-4600
Toll-free: 1-800-831-AUBE
Fax: (450) 358-4650
Email: aube.service@honeywell.com
For more information on our products, go to
www.aubetech.com
400-032-001-B30/11/062/2
