Adapter Configuration
Wizard • Link Info. • Configuration • Security • Site Survey • About
Wizard screen 2
This screen shows the status of your network connection.
Your adapter should have found the network associated with the SSID you entered, and automatically set the channel to agree with your wire- less router and/or access point. If you see Pass in the top two fields on this screen, you are ready to close this window and begin using your wire- less network. Test this by visiting the Internet (see below).
You can view or change the adapter setting from the other screens. Just click on the tabs in the blue menu bar at the top of this screen.
Test Internet Access
To test Internet access, launch your web browser and enter:
www.plugandshare.att.com
When you press Enter, the AT&T Plug&Share™ screen should appear. If it does not, see the Troubleshooting section on page 30.
Problems?
If this screen does not appear when you test Internet access, or if you see the word Fail in either of the top two fields of the Wizard screen shown above, please turn to the Troubleshooting section on page 30.
AT&T Plug&Share™ Wireless USB Adapter 54 Mbps 6602G | 6 |