Overview, Package Contents, System Requirements

Introduction

Overview

The AT&T Plug&Share™ Wireless PCI Adapter allows you to connect any desktop computer with an avail- able PCI slot to a compatible wireless network.

Package Contents

Please check to make sure your package contains the following items:

Quick

Start Guide

Plug&Share™	CD-ROM
Wireless PCI Adapter	Contains installation software and
108 Mbps 802.11g	printable versions of this User
	Manual, Quick Start Guide and
	Safety & Warranty Information.

Safety &

Warranty

Information

System Requirements:

You must have a desktop computer with the following applications & hardware:

• Windows® 98 SE, Me, 2000 or XP

•Available PCI slot

•Intel® Pentium II (or higher)

•64 MB of RAM

•CD-ROM drive

•5 MB of available hard-disk space (60 MB to load Adobe® Acrobat® Reader®)

Note: Installation may require use of a spade- tip or philips-head screwdriver.

•AT&T Plug&Share™ Wireless Router (or other 802.11b or g compliant router or access point)

•AT&T Plug&Share™ Wireless 6850G Router (for 108 Mbps data rate)

STEP 1: Install the Driver and Configuration Utility

1Do NOT install adapter first. Insert the enclosed CD-ROM into your CD-ROM drive.

2Your CD auto-run function may start automatically. If it does not, click on the Start button. Click Run and enter D:\autorun. (If your CD-ROM drive is not your D drive, use the appropriate drive letter.)

3When the adapter menu screen appears, click on Install Software from the menu on the left side of the screen.

4The InstallShield Wizard will appear.

5Different versions of Windows® will present different screens. Press Next at each screen until the Wizard driver installation has completed. IMPORTANT: Remove CD-ROM disk before continuing.

6Some versions will present a screen that asks about restarting your computer. Choose Yes, I will restart my computer now.

7Click Finish, if necessary. A new icon will appear on your Windows® desktop. You can double-click it to launch the utility at any time.

Proceed to Step 2 only after the software has been correctly installed.

If correctly installed, a Utility icon (four vertical bars) should appear next to your computer’s time display. An “X” indicates that software installation was successful, but the wireless adapter is not yet activated.

AT&T Plug&Share™ Wireless PCI Adapter 108 Mbps 6550G