Motorola CPEI 150 user manual What’s in the Box?, Easy Setup

2 Installation

Overview

To connect the CPEi150, you need to review the following sections:

•What’s in the box?

•Easy Setup

What’s in the Box?

Before you begin installation, check that you have received the following items with your CPE:

Table 2-1CPE Box Contents

Item	Description
AC Adaptor	Power Adaptor
Power Cord	Power cord that connects the AC Adaptor
	to the CPE
Ethernet Cable	Cable to connect the Ethernet port on
	your CPE to your PC or laptop computer
	ethernet port
Quick Start Guide	Guide to demonstrate the setup and basic
	IP configuration

Easy Setup

Perform the following tasks before attaching the power cord or powering up the unit:

•Rotate the base of the CPE to be in a perpendicular position.

•Connect one end of the Ethernet cable to the Ethernet port of the CPE. Stand the CPE vertically on a flat surface.

•Connect the other end of the same Ethernet cable to an Ethernet port on your PC or laptop computer.

•Connect the power cord and the power adapter together.

•Plug the power adapter into an AC power outlet.

•The CPE will automatically turn on.

•Connect the power adapter to the power connector on the side of the unit.

NOTE

Do NOT mount the CPE unit horizontally and do NOT block the air ventilation holes at the top of the unit.

2-2	68P09291A19-C
	APR 2009