B
3 |
| Connecting the Modem | ||
|
|
| ||
|
|
|
| |
|
|
| This product is for indoor use only. Do not route the Ethernet cable outside |
|
|
|
| of the building. Exposure of the cables to lightning could create a safety |
|
|
|
| hazard and damage the product. |
|
|
|
|
|
|
Before installing the modem, choose a location where the PC and modem are preferably near existing cable and electrical wall outlets.
1.Verify that the coaxial cable is connected to a cable outlet or splitter.
2.Connect the other end of the coaxial cable to the Cable connector on the modem.
3.Plug the power cord into the Power port on the modem.
4.Plug the other end of the power cord into an electrical outlet.
5.Connect the Ethernet cable to the Ethernet port on the modem.
6.Connect the other end of the Ethernet cable to the Ethernet port on the PC.
Testing the Connections
Perform the following connectivity test to verify that all the components were connected properly:
1.Power on your PC and then log on.
2.Check that the POWER, RECEIVE, SEND, and ONLINE front panel lights on the modem are either ON or FLASHING. See Front Panel for additional status information.
SB6141 DOCSIS 3.0 Cable Modem • User Guide | 4 |
|