Connections, Power LED should light solid green

2Connections

ENGLISH

Note: Macintosh users: skip to Step #2 below.

1.Windows users: Insert the Motorola Netopia CD into your CDROM drive. The Installation Guide Wizard should start automatically and the Welcome screen should appear to step through your connection installation(s).

The Motorola Netopia Installation Guide Wiz- ard automates several tasks to get you up and running easily. Run the Wizard on every Win- dows-based PC that will connect to your net- work.

Click the Next button.

Follow the on-screen instructions to make all of your connections.

2.Locate the Modem near a power source, a DSL wall outlet, and in a location where air can circulate freely around it.

3.Connect the rounded end of the power supply to the power jack on the back panel of the Modem. Then, plug the power supply into an electrical outlet.

The Power LED should light solid green.

4.Connect one end of the gray RJ-11 Phone cable to the port labeled “DSL” on the Modem. Connect the other end of the Phone cable to your DSL wall outlet.