Ericsson G32, G36 manual Web-based Configuration

Web-based Configuration

This chapter describes the interface and user settings (volume, ringing signals, dial speed setups etc) that are available and the procedures for the use of your PCs standard modem to make data calls (Internet browsing, e-mail, etc.) through the FWT line interface. To be able to send and receive data calls, you need:

•A PC equipped with an analog modem and the appropriate com- puter program (Web Browser, E-mail, etc).

•A SIM card that supports data transmission over the GSM network.

Note: If you do not have a modem in your PC, the FWT can be configured to act as a modem. Please refer to the topic Connect- ing PCs documented on page 21 for more detailed information.

To be able to access the User Interface settings the following steps must be followed:

•Open your Web Browser on your PC, and type the following default URL: http://192.168.1.1/default.asp

•The following configuration page will be displayed.

Note: Use PDP context 6 to access the web-based configuration pages on the FWT, e.g. *98*06#.

Fixed Wireless Terminal: G32 & G36 55