Dynalink RTA1335 setup guide 5Getting On-line, Connect to Internet

Page 5

ADSL 2+ 4-Port Modem Router Quick Set-up Guide

5Getting On-line

Before you start, the DSL & Ethernet lights on the router must be on. Refer to Section 10 – Troubleshooting of this Guide to resolve any issues.

STEP 1 GO TO THE ‘CONNECT TO INTERNET’ PAGE

Start your web browser. Enter the default address http://192.168.1.1. Type admin for both User name and Password.

See Q1 in Section 10 - Troubleshooting if you cannot get this screen.

Next you will be in the Quick Start >

Connect to Internet page.

If your ISP specifies that your ADSL service is PPPoE, you must now follow Section 6 to change connect mode to PPPoE. Check with your ISP if you are unsure.

STEP 2 ENTER INTERNET ACCOUNT DETAILS

Enter your Internet account User Name & Password in the exact format as specified by the ISP. Usually the user name resembles an e-mail address with suffix @isp.co.nz. Make sure the page displays “Your DSL router is ready to connect”, before clicking Connect.

See Q2 in Section 10 – Troubleshooting, if after several minutes the message “Your DSL router is not ready to connect” still shows.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ADSL2+ 4-Port Modem Router Page Router configuration & management 1Default Configuration for New Zealand2Before you start FirewallIP Address menu 3Connecting the routerConnect to Internet 5Getting On-linePage 6PPPoE Firewall, port forwarding, DMZ & traffic restrictions Some advanced functions of your routerAdsl 2+ 4-Port Modem Router Quick Set-up Guide Page 9Function Colour & Status Definition Indicator lightsQ1. Cannot open the router control panel from my browser 10TroubleshootingQ3. Need to install router on a network that does not use How to get information update Warranty
Top Page Image Contents