Dynalink RTA1335 setup guide 1Default Configuration for New Zealand, 2Before you start, Firewall

Page 3

ADSL 2+ 4-Port Modem Router Quick Set-up Guide

1Default Configuration for New Zealand

This Router is shipped with the following factory default settings.

Router IP address	192.168.1.1
Subnet mask	255.255.255.0
VPI	0
VCI	100
Connect mode	PPPoA VC-MUX
NAT	enabled
DSL line mode	G.DMT
WAN IP	dynamic
DHCP	enabled
DNS relay	on
UPnP IGD	enabled
Firewall:
Incoming requests	blocked
Outgoing traffic	not blocked
Router configuration & management:
User name	admin
Password	admin
Telnet password	admin

The majority of users in New Zealand will be able to connect using the default factory setting. They can skip Section 6 of this Guide. Only if your ISP advises explicitly that you have a ”PPPoE service”, then you need to follow Section 6.

2Before you start

Make sure your computer has these installed: Ethernet port

TCP/IP protocol enabled

A web browser, Internet Explorer 5.x/Firefox1.x/Netscape 6 or better.

Obtain your Internet account information from your ISP:

Login user name and password

Public IP address (only if you subscribe for static IP)

DNS server IP (only if specified by ISP).

Image 3

Contents ADSL2+ 4-Port Modem Router Page Firewall 1Default Configuration for New ZealandRouter configuration & management 2Before you startIP Address menu 3Connecting the routerConnect to Internet 5Getting On-linePage 6PPPoE Firewall, port forwarding, DMZ & traffic restrictions Some advanced functions of your routerAdsl 2+ 4-Port Modem Router Quick Set-up Guide Page 9Function Colour & Status Definition Indicator lightsQ1. Cannot open the router control panel from my browser 10TroubleshootingQ3. Need to install router on a network that does not use How to get information update Warranty