Enfora Using the GSM/GPRS Spider SA Modem I/O Interface, Wago I/O Connector Attachment

Page 16

GSM/GPRS Spider SA User Manual

3.6Using the GSM/GPRS Spider SA Modem I/O Interface

The GSM/GPRS Spider SA Modem provides an external I/O connector that can be used to interface with other devices. The mating I/O connector and operating tool part numbers are provided below:

Wago I/O Connector – 733-108 FEMALE CONNECTOR WITH CAGE-CLAMP - 8 POLE

Connector Tool – 233-332 OPERATING TOOL FOR FRONT-ENTRY WIRING OF SERIES 233

The Wago connector is attached to the SA as shown in Figure 9.

Figure 9: Wago I/O Connector Attachment

The insertion of a bare wire in the Wago I/O connector is shown in Figure 10.

Figure 10: Wago Connector Wire Insertion

GSM0000PB001MAN

10

Version 1.07 - 02/14/05

Image 16

Contents Enfora GSM/GPRS GSM0000PB001MAN Limited Warranty Enfora L.P -MONTH Limited WarrantyIii Version 1.07 02/14/05 Revision History Release Date Description of Changes Number Figures Introduction About the GSM/GPRS Spider SA About this ManualSystem Requirements Spider SA Front and Back ViewRegulatory Compliance FCC DisclaimerInstallation Subscriber Identity Module SIM Card Inserting a SIM Card in a GSM/GPRS Spider SA ModuleConnecting the Power Supply Connecting The Power Supply To Spider SAGSM Operating Power Gprs Operating PowerConnecting the Serial Cable Connecting the Serial Cable to Spider SAConnecting the GSM/GPRS Antenna GSM/GPRS Spider SA Connecting the AntennaAttaching a Microphone/Speaker Attaching a Headset to the GSM/GPRS Spider SA ModuleUsing the GSM/GPRS Spider SA Modem I/O Interface Wago I/O Connector AttachmentGpio Pin Configuration SA Gpio Characteristics LED FunctionsMounting the GSM/GPRS Spider SA GSM/GPRS Spider SA Mounting Bracket attachedGSM/GPRS Spider SA Mounting Bracket separated GSM/GPRS Spider SA Mounting Bracket ready to mount Frequently Asked Questions FAQ How do I configure a PPP connection for PocketPC 2002? Tech Support