Cisco Systems V110 manual Show Command Examples, Show modem, See also show modem at

Page 5

show Command Examples

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt1/dr modmgt.htm#xtocid10451223

See also show modem at:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113aa/113aa_2/58cfe ats/c5800uas.htm#19600

show modem log

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt1/dr modmgt.htm#xtocid10451261

show modem configuration

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt1/dr modmgt.htm#xtocid10451239

show modem connect-speeds

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt1/dr modmgt.htm#xtocid10451245

show modem operational-status

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt1/dr modmgt.htm#xtocid10451279

For the commands above, MICA Modem Management code has been modified to display the correct information for V.110 associated Connect Protocol and Connected Standard. In addition, the correct line speeds for V.110 related Bearer Rates have also be added to commands that display the information.

For other and related modem management commands, such as modem-at mode, see:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt1/drmo dmgt.htm#xtocid104510

show Command Examples

The show modem command includes outputs for the show modem configuration command and the show modem connect-speedscommand.

show modem

Fields that have been added or changed for this command are:

Modem Type V.110

Protocol: ISDN Mode

Connection Speeds 34000

The show modem command example is as follows:

router# show modem 1/0

 

 

 

 

 

 

 

Mdm

Typ

Status

Tx/Rx

G

Duration

RTS

CTS

DCD

DTR

1/0

V.110

Conn

9600/9600

0

10:12:19

x

x

x

x

Modem 1/0, Mica Hex Modem (Managed), Async1, TTY1

 

 

 

 

Firmware Rev: 2.7.0.6

 

 

 

 

 

 

 

Modem config: Incoming and Outgoing

 

 

 

 

 

 

Protocol: ISDN Mode, Compression: None

 

 

 

 

 

Management config: Status polling

 

 

 

 

 

 

RX signals:

0 dBm

 

 

 

 

 

 

 

Basic V110 for MICA Modems on Cisco Access Servers 5

Image 5
Contents Feature Summary Feature OverviewTransmission Speeds/Bearer Rates BenefitsRestrictions Related Documents Related Features and TechnologiesSupported Platforms PrerequisitesList of Terms and Acronyms Configuration TasksCommand Reference Fields that have been added or changed for this command are Show Command ExamplesShow modem command example is as follows Show modemShow modem operational-status Show modem operational-statuscommand example is as followsShow modem log Show modem log command example is as followsModem State event State Terminate Atdi Command place V.110 call Atdi Command place V.110 callExample Debug Commands for Cisco AS5800 Debug CommandsExample Debug Commands for Cisco AS5200 and Cisco AS5300