Installing Software
Additional Features in Device Controls
Digital I/O
Live! Drive
When you enable this feature, remove the ¼" to 3.5mm adapter from the Headphones jack if you are not using it. Otherwise, no sound will be heard from the speakers.
1.Insert the installation disc into your
The disc supports Windows AutoPlay mode and starts running automatically.If not, see “Troubleshooting” on page 17.
2.Follow the instructions on the screen to complete the installation.
After you install the software for the Live! Drive IR, you will be able to enable the SPDIF Bypass feature for your digital inputs and outputs, and mute your speakers when you plug your headphones into Live! Drive IR. These two new features appears as two new tabbed pages in Device Controls.
To enable the SPDIF Bypass feature:
•On the Digital I/O tabbed page, select the Enable check box to place a check mark in it.
SPDIF Bypass is required if you want audio signals passing through SPDIF In to be routed directly to SPDIF Out, without passing through the processor chip.
To mute the speakers when using headphones:
•On the Live! Drive tabbed page, select the Mute speakers when using headphones check box to place a check mark in it.
14 Live! Drive IR Quick Start SB0010