Magma CB1F manual Slot CardBus PCI Expansion System, Pre-Installation Information

0$*0$

&KDSWHU￿￿￿￿￿￿￿,QWURGXFWLRQ￿

The 1 Slot CardBus PCI Expansion System

MAGMA's 1 Slot CardBus PCI Expansion System is a general-purpose bus expansion system for the Peripheral Component Interconnect (PCI) local bus. The expansion bus is fully compliant with the PCI Local Bus Specification. The PCI Expansion System consists of a CardBus Card, an expansion bus cable (a shielded, high-speed cable), and a chassis with a power supply.

Enclosure:	Portable
Dimensions:	5.45"W x 1.70"H x 8.02"D (CB1H)
	5.45"W x 1.70"H x 13.43"D (CB1F)
Weight:	2.5 lbs.
Construction:	Aluminum/Steel
Cooling:	Optimal Cooling with a 4 CFM fan
Motherboard:	1 PCI Slot (supports full or short-length PCI cards)
AC-DC Power Brick	45 Watt
	External 115-230VAC AC Power Supply (included)
	Providing 12 volt DC input power
	Power to PCI Slot:
	4.0A @ +3.3V	3.0A @ +5V
	0.6A @ +12V	0.6A @ -12V
PCI Bus:	32 bits/33 MHz
Environment:	0° to 50° C Operating Temperature
	-20°to 60° C Storage Temperature
	5% to 85% Relative Humidity, Non-condensing
Certifications:	FCC Class A Approved
	CE Compliance
Warranty:	1 Year Return to Factory
Options:	1 ½ meter cable
	6-foot battery cable with male XLR 4-pin connector

Pre-Installation Information

Before using the MAGMA PCI Expansion System you should perform the following steps:

• Inventory the shipping carton contents for all of the required parts

• Gather all of the necessary tools required for installation

• Read this manual￿6ORW6HULHV8VHU￿V0DQXDO

Follow these suggested guidelines and cautions while setting up your PCI Expansion System:

• Only use the interface cable provided by MAGMA

• Use keyed connectors (to prevent attaching a cable backwards)

• Be careful when routing signal cables to your devices

• Avoid sharp bends or folds in the signal cable