SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 30)

MOWER DRIVE BELT REMOVAL

•Park tractor on a level surface. Engage parking brake.

•Lower attachment lift lever to its lowest position.

•Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

•Remove belt from electric clutch pulley (M), both man- drel pulleys (R) and all idler pulleys (V).

MOWER DRIVE BELT INSTALLATION

•Install belt around all mandrel pulleys (R) and around idler pulleys (V) as shown.

•Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

•Raise attachment lift lever to highest position.

V

M

R

R

Fig. 30

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, then the brakeneedstobeserviced.Contactaqualifiedservicecenter.

TO REPLACE MOTION DRIVE BELT (See Fig. 31)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1.Remove mower (See “TO REMOVE MOWER” section in this manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Disconnect clutch wire harness (A).

3.Remove anti-rotation link (B) on right side of tractor.

4.Remove belt from stationary idler (C) and clutching idler (D).

5.Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F).

6.Remove belt downward from engine pulley and around electric clutch (G).

7.Slide belt toward rear of tractor, off the steering plate

(H) and remove from tractor.

 

 

G

 

 

H

B

A

 

 

 

 

C

 

 

D

J

 

 

 

F

 

Fig. 31

BELT INSTALLATION -

1.Install new belt from tractor rear to front, over the steer- ing plate (H) and above clutch brake pedal shaft (J).

2.Pull belt toward front of tractor and roll belt around electric clutch and onto engine pulley (G).

3.Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (F). Be sure belt is inside the belt keeper.

23

Page 22 Page 24
Page 23
Image 23
Jonsered LT2218A manual To Replace Mower Blade Drive Belt See Fig, To Check Brake, To Replace Motion Drive Belt See Fig
Page 22 Page 24

LT2218A specifications

The Jonsered LT2218A is a reliable, high-performance lawn tractor designed for residential use, delivering exceptional cutting efficiency and user comfort. This model is particularly favored by homeowners with medium to large-sized lawns due to its robust features and easy operability.

One of the standout features of the LT2218A is its powerful 18 hp engine, which ensures a smooth and strong performance even on challenging terrains. The engine is paired with a hydrostatic transmission that allows for seamless speed adjustments without the need for manual shifting. This feature provides excellent maneuverability, allowing the operator to focus on the task at hand while maintaining control over the speed.

The cutting deck of the Jonsered LT2218A is designed for versatility and precision. It boasts a 42-inch cutting width with a stamped steel construction, ensuring durability and a clean cut. This deck is equipped with multiple cutting height adjustments, ranging from 1 to 4 inches, which enables users to customize their mowing experience according to varying grass lengths and conditions.

Another notable characteristic of this lawn tractor is its ergonomic design, which emphasizes user comfort. The adjustable seat and easy-grip steering wheel contribute to an enjoyable riding experience, reducing operator fatigue during longer mowing sessions. Additionally, the tractor is equipped with a simple control panel that allows for easy access to all essential functions, ensuring that users can operate the machine without unnecessary complexity.

The Jonsered LT2218A also features advanced technologies such as the Clean Out Port, which facilitates easy cleaning of the cutting deck after use, helping to maintain optimal performance. Moreover, the tractor's durable chassis ensures stability and longevity, making it a sound investment for homeowners.

For those looking for a practical, efficient, and user-friendly lawn tractor, the Jonsered LT2218A stands out as an excellent choice. With its strong engine, versatile cutting options, and user-centered design, it promises to make lawn care a more enjoyable and effective task for any homeowner.
Top Page Image Contents