Magma CB1F manual $331,%LQGRZVULYHU, Windows 98SE and Windows ME Instructions

0$*0$

$33(1',;￿%￿￿￿￿￿:LQGRZV￿'ULYHU￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿,QVWDOODWLRQ ￿

The following sections will guide you through MAGMA CardBus Driver/Utility installation for each supported Windows operating system.

Windows 98SE and Windows ME Instructions

NOTE

Under Windows 98SE and Windows ME, it is recommended that you install the MAGMA CardBus Software Utility BEFORE connecting the MAGMA expansion chassis to your computer.

NOTE

Prior to installing the MAGMA CardBus Software Utility, you should be familiar with the installation procedures for the PCI cards that you are installing in the expansion chassis. Some PCI card manufacturers recommend that you install their software driver(s) prior to installing the hardware. If this is the case, you should install their driver before you connect and power up the expansion chassis. You may be required to reboot after installing third-party PCI device drivers.

There are no MAGMA CardBus Drivers required for Windows 98SE and Windows ME. The Windows operating system will recognize and find the MAGMA CardBus-to-PCI Expansion System the first time you power up with the expansion chassis connected to your computer. You will be required to reboot.

However, MAGMA has developed a Software Utility that has proven to improve performance in some applications. This Software Utility has been included in the MAGMA CardBus CD that you received with your expansion chassis. You should install the MAGMA CardBus Software Utility BEFORE connecting the CardBus-to-PCI Expansion System to your computer.

Follow these￿instructions to Install￿the6ORWMAGMA6HULHVSoftware8VHU￿V0DQXDOUtility:	￿￿
PC
￿Windows Install
￿setup.exe

or you can download the latest MAGMA CardBus Software Utility from our web site at www.magma.com/support/support.htm.