Magma CB1F manual Special Instructions for Windows NT Service Pack

0$*0$

NOTE

Under Windows NT, you MUST connect the MAGMA expansion chassis to your computer BEFORE installing the MAGMA CardBus Driver.

MAGMA CardBus Drivers are required for Windows NT. Follow the Step-by-Step Instructions included in Chapter Two: Quick Start Guide prior to installing the MAGMA CardBus Driver. It is important to apply power to the expansion chassis first, and then apply power to your computer.

WARNING

You must be logged in as ‘System Administrator’ while installing the MAGMA expansion chassis. You must remain logged in as ‘System Administrator’ until installation Is complete.

Special Instructions for Windows NT Service Pack 6

If you are running Windows NT Service Pack 6, you must disable Pcmcia under Control Panel before installing the MAGMA CardBus Driver. If you are not running Service Pack 6, you may skip to page 20.

Go to ·Start ￿Settings ￿Control Panel ￿Devices ￿Pcmcia ￿ Startup… ￿Choose Manual

Click	and the following Devices Window will appear:	￿￿
Click	. The Devices Window￿6ORWshould6HULHVnow8VHUlook￿V0DQXDOlike this: