Manually Configuring your Modem
This Modem supports both DynDNS (www.dyndns.org) and TZO (www.TZO.com) DDNS connections only. You will need to register an account with either of these Dynamic DNS websites in order to utilize this function.
Parameter | Description |
|
|
Provider | Select either DynDNS or TZO |
|
|
Dynamic DNS | Enable or Disable DDNS Function |
|
|
DDNS Domain | Type in your domain name (e.g. mydns.dyndns.org) |
Name |
|
|
|
DDNS Account/ | Add your account username or email address |
(DDNS Provider will specify) | |
|
|
DDNS | Add your account password |
Password/Key |
|
|
|
Tools
Use the Tools menu to
Configuration Tools
Check Backup Modem Configuration and click “NEXT” to save your Modem’s configuration to a file named “backup.cfg” on your PC.
You can then check Restore from saved Configuration file (backup. cfg) to restore the saved backup configuration file.
To restore the factory
settings, check Restore Modem to Factory Defaults and click “NEXT.” You will be asked to confirm your decision. Click “APPLY” to proceed, or “CANCEL” to go back.
Manually Configuring your Modem
Firmware Upgrade
Use this screen to update the firmware or user interface to the latest versions. You can download the latest firmware from http://www. belkin.com/dslModems.
It is recommended that you back up your Modem’s settings prior to updating the firmware, you may loose all your current settings. Refer to “Backup Modem Configuration”.
Please note: If your Modem is functioning correctly, we do not recommend you update the firmware. Belkin is not responsible for any consequence as result of a firmware update. Please consult Belkin Technical Support prior to updating the Modem’s firmware.
Download the file to your hard drive. Then click Browse... to find the file on your computer. Select the firmware file and click “Open.” Click “BEGIN UPGRADE” to start the upgrade process.
Reset
This function will reboot the Modem, no settings will be lost during this proccess.
Should your unit become unresponsive for any reason, you can simply perform a reset from this page. Performing a reset will reboot the device. Your configuration settings will remain the same.
1
2
3
4
5
6
7
section
52 | 53 |