Cisco Systems 4027668, AAC400210112234 important safety instructions Installing USB Drivers

Page 24

Installing USB Driver

Installing USB Driver

To install USB drivers, your PC must be equipped with a USB network interface and a Microsoft Windows 2000 or Windows XP operating system. This section contains instructions for installing the USB drivers for the cable modem.

The USB drivers needed for your cable modem are located in the Roof directory of the Installation CD provided with your cable modem.

Note: If you are not using the USB interface, skip this section.

Installing USB Drivers

The USB driver installation procedures are different for each operating system. Follow the appropriate instructions in this section for your operating system.

Installing USB Drivers

1Insert the Installation CD into the CD-ROM drive of your PC.

2Make sure the power is connected to your cable modem and that the POWER LED status indicator on the front panel of the cable modem illuminates solid green.

3Connect the USB cable to your computer's USB port. Then, connect the other end of the USB cable to the USB port on the gateway.

4Click Next in the Found New Hardware Wizard window.

5Select Search for a suitable driver for my device (recommended) in the Found New Hardware Wizard window, and then click Next.

6Select CD-ROM drives in the Found New Hardware Wizard window, and then click Next.

7Click Next in the Found New Hardware Wizard window. The system searches for the driver file for your hardware device.

8After the system finds the USB driver, the Digital Signature Not Found window opens and displays a confirmation message to continue the installation.

9Click Yes to continue the installation. The Found New Hardware Wizard window reopens with a message that the installation is complete.

10Click Finish to close the Found New Hardware Wizard window. The USB drivers are installed on your PC, and your USB devices are ready for use.

11Try to access the Internet. If you cannot access the Internet, go to Frequently Asked Questions (on page 26). If you still cannot access the Internet, contact your service provider for further assistance.

24

4030802 Rev C

Image 24
Contents Important Safety Instructions This DocumentImportant Safety Instructions Mitteilung für CATV-Techniker Aviso a los instaladores de sistemas CatvPower Source Warning Verify the Power Source from the On/Off Power Light Ground the Product Protect the Product from LightningProtect from Exposure to Moisture and Foreign Objects Service Warnings Check Product Safety Protect the Product When Moving ItFCC Compliance United States FCC ComplianceDeclaration of Conformity Canada EMI RegulationCE Compliance CEModem/EMTA Benefits and Features Introducing the DPC3010 and EPC3010Home Networking PerformanceDesign and Function ManagementWhats in the Carton? Front Panel Description Back Panel Description What Are the System Requirements for Internet Service? Minimum System Requirements for a PCMinimum System Requirements for Macintosh System Requirements for an Ethernet ConnectionHow Do I Set Up My High-Speed Internet Access Account? Do Not Have a High-Speed Internet Access AccountAlready Have an Existing High-Speed Internet Access Account Where Is the Best Location for My Cable Modem? How Do I Mount the Cable Modem on the Wall? Before You BeginMounting Instructions Location and Dimensions of the Wall-Mounting Slots Wall Mounting Instructions Connecting and Installing Internet Devices How Do I Connect My Devices to Use the Internet?To connect devices Connecting the Cable Modem for High-Speed Data Service Connecting the Cable Modem for High-Speed Data Service Installing USB Driver Installing USB DriversInstalling USB Drivers Installing USB Drivers on Windows XP Systems Frequently Asked Questions How Do I Configure TCP/IP Protocol?Configuring TCP/IP on Windows 95, 98, 98SE, or ME Systems Configuring TCP/IP on Windows 2000 Systems Configuring TCP/IP on Windows XP SystemsConfiguring TCP/IP on Macintosh Systems How Do I Renew the IP Address on My PC? How do I arrange for installation? Renewing the IP Address on Windows NT, 2000, or XP SystemsWhat if I dont subscribe to cable TV? How does the cable modem connect to my computer?Common Troubleshooting Issues Dont understand the front panel status indicatorsCan I run more than one device on the modem? Cable modem does not register an Ethernet connectionTips for Improved Performance Check and CorrectFront Panel LED Status Indicator Functions Initial Power Up, Calibration, and RegistrationPower Online Link Normal OperationsFront Panel LED Status Indicators During Special Conditions Special ConditionsTrademarks DisclaimerDocumentation Copyright Notice Software and Firmware Use NoticeFor Information If You Have Questions

AAC400210112234, 4027668 specifications

Cisco Systems, a global leader in networking technology, has introduced a range of products designed to empower organizations with cutting-edge solutions for their networking needs. Among their extensive portfolio, the model 4027668 (often referred to by its part number AAC400210112234) stands out, showcasing an impressive array of features and characteristics that cater to modern enterprises.

One of the primary features of Cisco Systems 4027668 is its advanced security capabilities, designed to protect network infrastructures against evolving cyber threats. This model incorporates next-gen firewall technology, intrusion prevention systems (IPS), and advanced malware protection, ensuring that organizations can safeguard sensitive data and maintain compliance with industry regulations.

In terms of performance, the 4027668 is engineered to handle high bandwidth requirements with ease. It supports a multi-gigabit architecture, enabling data transmission speeds that accommodate the demands of today’s applications, including video conferencing and cloud-based services. This capability is essential for organizations looking to provide seamless connectivity and optimize user experiences.

Flexibility and scalability are also hallmark characteristics of this Cisco model. It is designed with a modular approach, allowing businesses to configure their network according to current needs while retaining the ability to expand as requirements grow. This adaptability is particularly beneficial for dynamic environments where resource demands can fluctuate.

Cisco Systems 4027668 also embraces the latest networking technologies, including support for software-defined networking (SDN) and network functions virtualization (NFV). These technologies enable more efficient utilization of resources and facilitate quicker deployment of new services, leading to reduced operational costs and increased agility.

Management and monitoring capabilities are also enhanced in this model. With Cisco's powerful network management tools, IT teams can gain visibility into network performance, troubleshoot issues promptly, and apply configurations centrally, streamlining operations and improving overall efficiency.

Furthermore, the integration of cloud-based services allows for centralized control and automation of network processes, aligning with the trend towards hybrid IT environments. This makes the 4027668 an excellent choice for organizations leveraging cloud technology for their operational needs.

In summary, Cisco Systems 4027668, with part number AAC400210112234, is a robust networking solution characterized by its advanced security features, high performance, scalability, and modern technologies, making it a strategic investment for enterprises aiming to enhance their network infrastructure.