Cisco Systems BEFCMU10 manual Installing the USB Driver for Windows, Welcome

Cable Modem with USB and Ethernet Connections

Chapter 5: Installing the USB Driver for Windows 2000

Overview

If you are connecting the Cable Modem to your computer using the USB port, follow these instructions to install the USB driver required for Windows 2000.

Instructions for Installing the Driver

1.Power on your computer. Make sure you have administrative rights on your computer; otherwise you cannot install the driver.

2.	Windows 2000 will automatically detect the Cable Modem. Insert the User Guide and USB Drivers CD-ROM	Figure 5-1: Welcome
	into your computer’s CD-ROM drive.
3.	On the Welcome screen of the Found New Hardware Wizard, click the Next button.
4.	On the Install Hardware Device Drivers screen, select Search for a suitable driver for my device
	(recommended). Then click the Next button.
5.	On the Locate Driver Files screen, select CD-ROM drives, and click the Next button.

Figure 5-2: Install Hardware Device Drivers

Figure 5-3: Locate Driver Files

Chapter 5: Installing the USB Driver for Windows 2000 8

Overview