Cisco Systems BEFCMU10 Connecting the Cable Modem, Overview, Connection Using the Ethernet Port

Page 9

Cable Modem with USB and Ethernet Connections

Chapter 3: Connecting the Cable Modem

Overview

You can connect the Cable Modem to your PC using either the Ethernet port or the USB port. If you use the USB port, you will also have to install a USB driver on your PC. If you are using the Cable Modem’s Ethernet port, proceed to the “Connection Using the Ethernet Port” section. If you are using the Cable Modem’s USB port, proceed to the “Connection Using the USB Port” section.

Connection Using the Ethernet Port

1.Power off your PC. If you have an existing cable modem that you are replacing, disconnect it at this time.

2.Connect the coaxial cable from your Internet Service Provider (ISP) or cable company to the Cable port on the back panel of the Cable Modem. (The other end of the coaxial cable should be connected according to the ISP or cable company’s instructions.)

3.Connect the included Ethernet network cable to the Ethernet port on the back panel of the Cable Modem.

4.Connect the other end of the Ethernet network cable to the RJ-45 port of your PC’s Ethernet network adapter or a network device, such as a router, switch, or hub.

5.Connect the included power adapter to the Power port on the back panel of the Cable Modem. Connect the other end to a standard electrical outlet.

6.The Power LED on the front panel of the Cable Modem should light up and remain lit.

7.Power on your PC.

8.Contact your cable ISP to activate your account. Your cable ISP will need the MAC address for the Cable Modem in order to set up your account. The 12-digit MAC address is printed on a bar code label on the bottom of the Cable Modem. Once you have given them this number, your cable ISP should be able to activate your account.

Congratulations! The installation of the Cable Modem is complete.

NOTE: Make sure that you have TCP/IP installed on your computer. For more information, refer to “Appendix B: Windows Help.”

Figure 3-1: Connect the Coaxial Cable

Figure 3-2: Connect the Ethernet Network Cable

Figure 3-3: Connect the Power Cable

NOTE: To activate your high-speed Internet account, you must contact your cable ISP after you have connected the Cable Modem.

Chapter 3: Connecting the Cable Modem

5

Overview

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Cable Modem Copyright and Trademarks Table of Contents Front Panel Back PanelWhat’s in this Guide? IntroductionIntroduction What’s in this Guide? Back Panel Ports Getting to Know the Cable ModemInternet, Online Front Panel LEDsConnecting the Cable Modem Connection Using the Ethernet PortOverview Connect the USB Cable Connection Using the USB PortInstructions for Installing the Driver Installing the USB Driver for Windows XPWelcome Installing the USB Driver for WindowsDriver Files Search Results Add New Hardware Wizard Installing the USB Driver for Windows MillenniumAdd New Hardware Wizard Installing the Driver for WindowsSelect Updated Driver Common Problems and Solutions Appendix a TroubleshootingPower on the Cable Modem goes on and off sporadically TCP/IP Appendix B Windows HelpAppendix C Glossary Cable Modem with USB and Ethernet Connections Cable Modem with USB and Ethernet Connections Cable Modem with USB and Ethernet Connections Cable Modem with USB and Ethernet Connections Cable Modem with USB and Ethernet Connections Cable Modem with USB and Ethernet Connections Appendix D Specifications Limited Warranty Appendix E Warranty InformationFCC Statement Appendix F Regulatory InformationAppendix G Contact Information

BEFCMU10 specifications

The Cisco Systems BEFCMU10 is a broadband cable modem router designed to provide high-speed internet access for residential and small office environments. As a product from a leading global networking hardware manufacturer, the BEFCMU10 combines advanced technologies to deliver reliable performance and exceptional connectivity.

One of the primary features of the BEFCMU10 is its support for DOCSIS 2.0, a widely adopted standard for high-speed data transmission over cable systems. This technology allows the modem to achieve download speeds of up to 35 Mbps and upload speeds of up to 10 Mbps, making it suitable for various internet activities, including streaming media, online gaming, and video conferencing.

In addition to its DOCSIS compatibility, the BEFCMU10 is equipped with built-in routing capabilities, allowing users to share their internet connection among multiple devices without the need for an external router. This integrated feature simplifies setup and conserves space, making it an ideal solution for users seeking efficiency and convenience.

The modem includes multiple Ethernet ports, which enable wired connections for devices such as computers and gaming consoles. These ports offer a reliable connection with minimal latency, enhancing the overall user experience for bandwidth-intensive applications. Additionally, the modem is compatible with various operating systems, making it versatile and user-friendly.

Security is another crucial aspect of the BEFCMU10. The device features built-in firewall capabilities, which help protect the network from unauthorized access and potential threats. This is particularly important in today's digital landscape, where online security is a top concern for many users.

Moreover, the aesthetically pleasing design of the BEFCMU10 allows it to fit seamlessly into various home or office environments. With its compact form factor, users can place it anywhere without consuming substantial space or disrupting their décor.

Overall, the Cisco Systems BEFCMU10 offers a robust combination of features, technologies, and characteristics that cater to the needs of modern internet users. Its DOCSIS 2.0 support, integrated routing capabilities, multiple Ethernet ports, and security features make it a reliable choice for those seeking efficient and effective internet connectivity.
Top Page Image Contents