AppendixC | Safety and Agency Regulatory Notices |
|
|
C.1 Safety Instructions
Climatic conditions The Speed Touch equipment is intended for:
Cleaning
Water and moisture
Power sources
Overloading
In:house stationary desktop use; the maximum ambient temperature may not exceed 40ºC (104ºF).
It must not be mounted in a location exposed to direct or excessive solar and/or heat radiation.
It must not be exposed to heat trap conditions and must not be subjected to water or condensation.
It must be installed in a Pollution Degree 2 environment.
Unplug this product from the wall socket and PC before cleaning. Donot use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool.
The Speed Touch is powered via the USB connector on your computer, or an USB hub port.
The powering of this product must adhere to the power specifications indicated on the marking labels.
Do not allow anything to rest on the USB cord. Do not locate this product where the cord will be subject to persons walking on it.
Pay particular attention to the cord's plug, receptacle and cable:to:body entry point; do not use the product when these points of the cord are damaged.
Do not overload wall (mains) outlets and extension cords as this increases the risk of fire or electric shock.
62 / 66 |
| 3EC 16807 AAAA TCZZA Ed. 07 |
|
|
|