Verizon MiFi 2200 manual Overview , How to Connect the MiFi 2200 in Wi‐Fi Mode No USB cable

Connecting in Wi-Fi Mode the first time:

Access MiFi Settings

Overview


After VZAccess Manager and the device drivers have been installed on your computer, you may elect to use the MiFi 2200 in WiFi mode.

The Web-based User Interface (shortened to Web UI in most of this document) is used to configure the MiFi 2200 while it is in “Wi-Fi” mode. In this mode, there is no USB connection from your host computer to the MiFi 2200, and the connection to the MiFi 2200 must be made via Wi-Fi.

How
to
Connect
the
MiFi
2200
in
Wi‐Fi
Mode



(No
USB
cable)


Note: The battery must be fully charged in order to use the MiFi 2200 in Wi-Fi mode

for the first time. (See Page 13 Setup: Wi-Fi Modem: Battery Use).





When you connect the MiFi 2200 in Wi-Fi mode, the following should occur once you press

the power button:

•The MiFi 2200 is powered as soon as you press the power button and the Power LED lights up.

•Once the MiFi 2200 is powered and has been activated, it automatically connects to the Internet provided that Mobile Broadband / NationalAccess service is available and one or more Wi-Fi devices are connected with MiFi.

•The 3G Status LED indicator on the device lights up and blinks according the connection speed.

22