Verizon GT701C user manual Changing the Password

Page 13

DSL Modem User Manual

5b. If PPPoE was selected in step 5, select the IP type (“Dynamic IP-DHCP[Default]” or “Single Static IP Address”). If Single Static IP Address was select- ed, enter the address in the appropriate text box.

6.Optional - Select the DNS type (“Dynamic DNS Addresses [Default]” or “Static DNS Addresses”). If Static DNS Addresses was selected, enter the pri- mary and secondary DNS addresses in the appropriate text boxes. If unsure what to enter in this section, contact the ISP.

7.Click Apply at the bottom of the screen.

8.Read the instructions on the next screen. The Modem is successfully configured.

The Power light flashes rapidly while the Modem restarts, then glows steadily green when fully operational. The Internet light will also glow steadily green. The Modem is now configured and users can start surfing the Internet.

If an error appears, stating the Web browser was unable to connect to the Internet, check the configuration settings. Ensure all the information required by the ISP is entered correctly.

Changing the Password

To create or change the password allowing access to the Modem’s Web Configuration screens, follow these instructions:

1.From the “Home” screen, select Quick Setup.

2.The “Welcome to the Quick Setup” screen appears. Select “Admin User Name and Password.”

10

Image 13

Contents User’s Manual Table of Contents Configuring Parental Controls Minimum System Requirements Introduction1Features Getting to Know the Modem Power LightDSL Light Ethernet Light Internet LightUSB Light DSL PortPower Port Reset SwitchPower Switch Ethernet PortThis page left intentionally blank Accessing Quick Setup Screens Performing a Quick SetupPage Internet Explorer Changing the Password Performing a Quick Setup This page left intentionally blank Broadband Connection Status Viewing Modem’s StatusPage Viewing the Modem’s Status Network Status Accessing Advanced Setup Screens Configuring4 Advanced SettingsPage Configuring Advanced Settings Dhcp Settings DSL SettingsEnding IP Address Beginning IP AddressSubnet Mask Lease TimeDomain Name LAN IP AddressDNS Dynamic or Static DNS ServerWAN IP Address Page Configuring Advanced Settings QoS Settings Upstream Destination QoS Settings Downstream Remote Management/Telnet QoS StatusTelnet Timeout Setting Static Routing Dynamic RoutingUSB Port Detection UPnP Universal Plug and PlayRemote Syslog Capture Time ZoneThis page left intentionally blank Accessing Security Screens Configuring5 Security SettingsPage Firewall Admin User Name and PasswordPage Low Applications Configuring Security Settings Page NAT Network Address Translation DMZ HostingPort Mapping Accessing Parental Control Screens Configuring6 Parental ControlsPage Services Blocking Schedule Rules Website BlockingConfiguring Parental Controls Page Accessing the Utilities Screens Configuring Modem’s UtilitiesPage Configuring the Modem’s Utilities Restore Default SettingsMultiple PVC Upgrade FirmwareWeb Activity Log System Log Ping Test OAM Ping TestReboot Troubleshooting TroubleshootingLAN Connection Failure Cannot Connect to the InternetCMD Time out error occurs when entering a URL or IP Address Frequently Asked QuestionsWhich protocols does the Modem support? Is the Modem flash-upgradeable? How do I do it?Which connection speeds does the Modem support? Will my Xbox work with the Modem?How do I find out what IP address my computer is using? What is the valid IP range I can use for my home network?What is NAT and how does it protect my network? What is the default username for the Modem?How many computers can be connected through the Modem? Does the Modem function as a firewall?Locating Computer Information ReferenceLocating Windows Operating System Files Appendix a Reference Click Search Windows 98 SE Switching to Static IP On the ComputerPage Do not include the periods they are automatically entered Enter the following numbers in the Subnet mask text box Windows Me Page Do not include the periods they are automatically entered Select Gateway, and, in the New gateway text box, enter Windows Page Appendix B Switching to Static IP on the Computer 192.168.1.64 Windows XP Page 192.168.1.64 Enter the following address in the Subnet mask text box Computer Security Comparing DSL Service with a Dial-Up ModemComputer Security Modem SecurityElectronic Security This page left intentionally blank General Specifications DEnvironmental LED IndicatorsGlossary Page Appendix E Glossary Page Service Acronym Definitions Service AcronymsIpsec IKE, Ipsec ESP IMAP, IMAPv3Smtp This page left intentionally blank