Jaton V.92_LX quick start Windows XP/ Vista Installation, Software Installation

Page 4

Software Installation:

This guide is intended to help you get started quickly with driver installation in Microsoft Windows.

Important Notice: Add second modem or change the modem to an existing PC system, you may proceed a few steps before install the new hardware and software (modem’s driver). The followings are some of the considers:

1.To change a new modem, please remove the existing modem driver, or disable it from Windows® system before you remove the existing hardware.

2.To added second modem, make sure the mainboard that has available IRQ for new devices, and there is no conflict between the others.

3.The driver installation for upgrade system as same as below, if error occur when you proceed step 1, or 2, please consult with your system dealer or the existing hardware manufacturer support.

áWindows® XP/ Vista Installation

Windows® XP is the latest version out from Microsoft and that has built-in PnP function to detects any new hardware (included this modem) on the system but make sure your motherboard utility driver is installed correctly.

4

Image 4
Contents FEATURES/SPECIFICATIONS Internal 56Kbps Fax Data modem with Caller IDSystem Requirements Check ListHardware Installation Hardware DescriptionWindows XP/ Vista Installation Software InstallationPage Installation To enable caller id Modem Dialing LocationPage Exclusive Obligation Other StatementsServices agreement Reseller/ VendorRegistered User OthersReducing Warranty Claim Rejections Entire ObligationPage Warranty Service Use Only FCC Shielded Cable Warning Trademark and Copyright