Navini Networks MX manual Installing the Modem, Step Action Illustration

Page 11

Navini Networks, Inc.

Ripwave MX Modem User Guide

Installing the Modem

(See, also, Addendum 1)

The following instructions explain how to install your Modem. Please read all instructions before installing the Modem. Also, turn off the computer and the Modem before installing the Modem.

Note: The Modem should be positioned to minimize interference with other equipment when transmitting. Also, Australian requirements state the Modem should be placed 30 cm or more from any person or user. If the antenna is closer than 20 cm from the user, Australian safety conditions are violated.

Step

Action

Illustration

1.Connect the Ethernet cable to the Ethernet port on the computer.

2.Connect the other end of the Ethernet cable to the Modem.

Ethernet cable connection

3.Connect the AC power

adapter to the Modem. Plug the other end of the power adapter into a 110/220 VAC 60/50 Hz outlet.

CAUTION! Use only

Power adapter

the AC power adapter

connection

supplied with the

 

Modem. Using any other

 

adapter can damage the

 

Modem.

 

11

060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)

Image 11
Contents For use with all RipwaveTM MX Modem models Ripwave MX Modem User GuideTable of Contents Navini Networks, Inc Ripwave MX Modem User Guide Permissions, Trademarks & Distribution Safety Battery Caution & Procedures Regulatory Information 2.4, 2.5-2.6, 3.4 & 3.5 GHz LMX Modem Introduction Package Inventory Modem ModelsHard Drive Minimum Computing RequirementsOperating Frequencies General InformationBack Physical CharacteristicsLMX Modems 2.3, 2.4, 2.5-2.6, 3.4, & 3.5 GHz FrontStep Action Illustration Installing the ModemInstalling the Modem Liquid Crystal Display LCD Accessing the Internet TroubleshootingLCD LCD IndicatorsNavdiagwindows.exe Installing Navini Diagnostics NavDiagInstalling NavDiag Step Action Illustration Troubleshooting Using Navini Diagnostics NavDiag Icons Signal Strength Signal Quality BarsHow to Increase the Strength and Quality of the Signal Parameters Screen Option Buttons Configuration Screen Trend Analysis Screen Statistics Screen About Screen Help Button Programs NavDiag Uninstall Uninstalling Navini Diagnostics NavDiagUsage Approximate Hours of Usage Before Recharge Required Optional Battery PacksLED Connecting the S-EBP Indicator Light on the S-EBPCharging the S-EBP HD-EBP Connecting DisconnectingIndicator Light on the HD-EBP Care and Maintenance Upgrading the Modem Navini Networks, Inc Ripwave MX Modem User Guide Operating System Ethernet interface Addendum 1 Ripwave-MX Modem PC TroubleshootingConfiguration Options Install Log Detail Navini Networks, Inc Ripwave MX Modem User Guide Navini Networks, Inc Ripwave MX Modem User Guide Navini Networks, Inc Ripwave MX Modem User Guide Between Navini Networks, Inc Buyer Addendum 2 End User Software License AgreementTrade Secrets Indemnifications and Warranty Object Code ONLY-NO Modifications