Navini Networks MX manual Battery Caution & Procedures

Page 6

Navini Networks, Inc.

Ripwave MX Modem User Guide

12.Do not expose the equipment to extreme hot or cold temperatures.

13.Do not use the equipment under the following conditions:

When the equipment has been exposed to water or moisture.

When the equipment has been damaged.

When the power cord is damaged or frayed.

When the equipment does not operate properly or shows a distinct change in performance.

Battery Caution & Procedures

WARNING! To reduce risk of injury or fire, follow these instructions when handling a battery.

1.Risk of explosion is possible if the battery is replaced with one not supplied by Navini Networks.

2.Do not dispose of the battery in a fire. It may explode. Check with the local codes for battery disposal guidelines.

3.Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or harmful to humans. If battery substances come in contact with the skin, seek medical help immediately.

4.Do not attempt to recharge the battery by any means except per the instructions in this manual.

5.Remove the battery from the equipment if the equipment is not going to be used for a long period of time. The battery could leak and cause damage to the equipment.

6.Exercise care when handling the battery to prevent shorting the battery with conducting materials such as bracelets, rings, and keys.

7.Store the battery pack in a dry place, 0 to +40 degrees Celsius.

8.Dispose of used batteries according to environmental guidelines.

6

060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)

Image 6
Contents Ripwave MX Modem User Guide For use with all RipwaveTM MX Modem modelsTable of Contents Navini Networks, Inc Ripwave MX Modem User Guide Permissions, Trademarks & Distribution Safety Battery Caution & Procedures Regulatory Information Introduction Package Inventory Modem Models 2.4, 2.5-2.6, 3.4 & 3.5 GHz LMX ModemGeneral Information Minimum Computing RequirementsOperating Frequencies Hard DriveFront Physical CharacteristicsLMX Modems 2.3, 2.4, 2.5-2.6, 3.4, & 3.5 GHz BackInstalling the Modem Step Action IllustrationInstalling the Modem Accessing the Internet Troubleshooting Liquid Crystal Display LCDLCD Indicators LCDInstalling Navini Diagnostics NavDiag Navdiagwindows.exeInstalling NavDiag Step Action Illustration Troubleshooting Using Navini Diagnostics NavDiag Signal Strength Signal Quality Bars IconsHow to Increase the Strength and Quality of the Signal Parameters Screen Option Buttons Configuration Screen Trend Analysis Screen Statistics Screen About Screen Help Button Uninstalling Navini Diagnostics NavDiag Programs NavDiag UninstallOptional Battery Packs Usage Approximate Hours of Usage Before Recharge RequiredConnecting the S-EBP Indicator Light on the S-EBP LEDCharging the S-EBP Connecting Disconnecting HD-EBPIndicator Light on the HD-EBP Care and Maintenance Upgrading the Modem Navini Networks, Inc Ripwave MX Modem User Guide Addendum 1 Ripwave-MX Modem PC Troubleshooting Operating System Ethernet interfaceConfiguration Options Install Log Detail Navini Networks, Inc Ripwave MX Modem User Guide Navini Networks, Inc Ripwave MX Modem User Guide Navini Networks, Inc Ripwave MX Modem User Guide Addendum 2 End User Software License Agreement Between Navini Networks, Inc BuyerTrade Secrets Indemnifications and Warranty Object Code ONLY-NO Modifications