Navini Networks, Inc. | Ripwave Wireless Broadband Access Card User’s Guide |
The Signal Strength and Signal Quality Bars, continued
How to Increase the Strength and Quality of the Signal
to 13 but less than or equal to 21. Red lines indicate a weak signal or an SNR less than 13.
To increase the strength and quality of the signal, change the location of the PC in which the Card is inserted. Try moving it closer to a window, to a higher location, away from other wireless devices (microwave ovens, cordless phones), and away from metal objects (shelves, file cabinets). As you reposition your PC, watch the Signal Strength and Quality bars on the NavDiag screen. Place your PC in the location where you receive the most green signal strength and quality bars.
The History Graphs
The Parameters
The History graphs plot the change in signal strength and signal quality over time. The graphs cover the last minute and are updated every second. Read the graphs from right to left. The right side of the graph represents the most recent status of your Card.
At the bottom of the Connection Status screen are four parameters. These parameters are BTS ID, Network ID, Active SW Version, and Standby SW Version.
The BTS ID indicates the BTS to which the Card is currently synchronized. The Network ID indicates the network in which the Card is operating. Active SW Version and Standby SW Version
Page 21
060210_pv1.7_Ripwave Wireless Broadband Access Card User’s