Navini Networks Ripwave manual Charging the S-EBP

Page 27

Navini Networks, Inc.

Ripwave MX Modem User Guide

The Indicator Light on the S-EBP, continued

Note1: As with any battery, when the S-EBP is left unused for a long period of time, it tends to lose its charge. When this happens and when the charge drops to approximately 5% of the full charge level, the red LED comes on to indicate that the battery’s charge level is low. After a limited duration, the internal circuitry will shut down both the LED and the battery to prevent the battery from going into a deep-discharge state. Recharging the battery will restore it to its normal healthy state.

Charging the S-EBP

The S-EBP needs to be recharged when the battery is connected to a Modem and the Modem is turned on but the LED on top of the battery remains off (indicating the battery has no power) or is red (indicating the battery level is low).

To recharge the S-EBP, use only the 12V charger that came with the S-EBP. Using any other charger can damage the battery. To charge the S-EBP, plug the 12V adapter into the 12V input socket on the S-EBP.

Note: The battery may charge while it is connected to a Modem.

Note: Do not attempt to plug the 12V adapter into the Modem as this can harm the Modem.

27

060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)

Image 27

Contents For use with all RipwaveTM MX Modem models Ripwave MX Modem User GuideTable of Contents Navini Networks, Inc Ripwave MX Modem User Guide Permissions, Trademarks & Distribution Safety Battery Caution & Procedures FCC Compliance and Advisory Statement Regulatory Information2.4, 2.5-2.6, 3.4 & 3.5 GHz LMX Modem Introduction Package Inventory Modem ModelsHard Drive Minimum Computing RequirementsOperating Frequencies General InformationBack Physical CharacteristicsLMX Modems 2.3, 2.4, 2.5-2.6, 3.4, & 3.5 GHz FrontStep Action Illustration Installing the ModemInstalling the Modem Liquid Crystal Display LCD Accessing the Internet TroubleshootingSignal Strength Indicator SSI LCD IndicatorsNavdiagwindows.exe Installing Navini Diagnostics NavDiagInstalling NavDiag Step Action Illustration Troubleshooting Using Navini Diagnostics NavDiag Icons Signal Strength Signal Quality BarsHow to Increase the Strength and Quality of the Signal Parameters Screen Option Buttons Configuration Screen Trend Analysis Screen Statistics Screen About Screen Help Button Programs NavDiag Uninstall Uninstalling Navini Diagnostics NavDiagUsage Approximate Hours of Usage Before Recharge Required Optional Battery PacksLED Connecting the S-EBP Indicator Light on the S-EBPCharging the S-EBP HD-EBP Connecting DisconnectingIndicator Light on the HD-EBP Charging Care and MaintenanceUpgrading the Modem Navini Networks, Inc Ripwave MX Modem User Guide Operating System Ethernet interface Addendum 1 Ripwave-MX Modem PC TroubleshootingRouters Navini Networks, Inc Ripwave MX Modem User Guide Navini Networks, Inc Ripwave MX Modem User Guide Navini Networks, Inc Ripwave MX Modem User Guide Between Navini Networks, Inc Buyer Addendum 2 End User Software License AgreementTrade Secrets Indemnifications and Warranty Object Code ONLY-NO Modifications