Quick Install
For best performance and easiest configuration, Iomega recommends connecting the Iomega NAS 100d to a wired network. For instructions on configuring the Iomega NAS via a wireless connection, see the user's manual on the Solutions CD.
If you have a problem, we can help. Please do NOT return this product to the store!
Your answer is on the web. Visit our
| Connect the included Ethernet cable to the Iomega |
| NAS and to an open network port on your router, |
| switch, or hub. |
Connect the power supply to the Iomega NAS and then to a power strip or outlet.
Press the power button on the back panel of the Iomega NAS.
NOTE: The Iomega NAS will take a couple of minutes to start up. Please wait until the Power LED changes to solid blue before proceeding.
If your network does not have a DHCP server, change your computer’s IP address to 169.254.10.85 with a subnet mask of 255.255.0.0. The default IP address of the Iomega NAS is 169.254.10.10. For more information on changing your computer’s IP address, see page 7.
4