Click on the IP Settings button.
Configure the IP Settings of the Iomega NAS to match your network, then click the Apply button.
The Iomega NAS is configured by default to act as a wireless access point. If you wish to connect to the Iomega NAS from wireless clients and do not already have a wireless access point, no change is necessary; however, you will need to connect the antenna to the Iomega NAS.
If you already have a wireless access point or do not wish to allow wireless clients to connect to the NAS, click on the Wireless tab, deselect the Wireless check box, and then click the Apply button.
Make any other desired configuration changes. See the user’s manual on the Solutions CD or the help system for more information on Iomega NAS 100d configuration options.
6