CONFIGURING MODEMS FOR YOUR COUNTRY
Using AT Commands to Set Country
If not using Windows, use AT commands to configure the modem. A complete list of country and region codes is available on the
1.Run a communication program and open a terminal window.
2.Type AT%T19,0,nn, where nn is the country/region code in hexadecimal format, press ENTER. OK appears.
3.Type ATI9 and press ENTER to verify the change.
The country code displays in decimal format, as in this example:
Country/Region | AT Command | Country code |
|
|
|
| (hexadecimal) | (decimal) |
|
|
|
Euro/NAM | AT%T19,0,34 (default) | 52 |
|
|
|
MultiModem® ISI ISI9234HPCIE Server Card User Guide | 21 |