Fostex PM-1MKII specifications Product Specifications, Cable and Wiring Information

Page 6

Product Specifications

Cabinet Dimensions

215mm (W) × 380mm (H) × 283mm (D) includes heatsink 250mm (D) cabinet only - no heatsink

8.5" (W) × 15" (H) × 11.25" (D) includes heatsink 9 7/8" (D) cabinet only - no heatsink

Net Weight

11 Kg

24.3 Pounds

Gross Weight Per pair (includes all packing material)

12.4Kg

27.3Pounds

Frequency Response

Free-Field Frequency Response : ±2dB 50Hz to 20KHz

Low Frequency Cutoff : 38Hz (-10dB)

High Frequency Cutoff : 23.5kHz (-10dB)

Acoustic Output:

Maximum Short Term SPL: 80 Hz - 3kHz > 105dB SPL 1m

Amplifier Power

High Frequency : 45 Watts

Low Frequency : 75 Watts

Amplifier Distortion

<0.007% THD @ 30 Watts / 8Ohm 20Hz-20kHz

Amplifier Signal to Noise Ratio

>93dB

20Hz - 30kHz Not Weighted

Amplifier Slew Rate

15V/sec

Power Requirements

US : 120VAC~60Hz

EUR/UK : 230VAC~50/60Hz

Power consumption

US: 58 Watts

EUR/UK: 58 Watts

Product improvement may warrant a change of specifications, newer materials or cosmetics, Changes in specifications and features may be made without notice or obligations.

Cable and Wiring Information

Use high-quality, shielded cables to connect your mixing console, workstation or other source to your monitors. Foil-shielded cables, such as Beholden 8451, 8761, or 9501 should do quite well. Other high quality cables are available and those that incorporate better shielding will yield an overall higher noise rejection, lowering your systems susceptibility to external interference. Another important tip to keep in mind when wiring your system is to route all line level cables away from the AC and other power sources, this will reduce the probability of having AC hum emanating from your studio monitors.

 

 

XLR

TRS

RCA

HOT (+)

 

PIN 2

TIP

TIP

COLD (-)

 

PIN 3

RING

 

GROUND

)

PIN 1

SHIELD

SHIELD

SHIELD (

Product Cleaning Instructions

Prior to cleaning the PM-1 MKmonitor the power must be disconnected from the PM-1 MKmonitor. Once the power has been terminated, cleaning can be accomplished using a damp (not wet) cleaning rag. A light common house hold cleaner can also be used, but care must be taken not to use harsh cleaning fluids. Regular dusting or cleaning with a damp rag will keep your product looking new for years.

p-6

Image 6
Contents PM-1MK Safety Instructions Introduction UnpackingSetup Instructions Monitoring Distance = 1 to 2 metersSetup Instructions Back Panel OverviewProduct Specifications Cable and Wiring InformationProduct Cleaning Instructions Declaration of EC Directive

PM-1MKII specifications

The Fostex PM-1MKII is a notable addition to the realm of studio monitors, recognized for its exceptional sound quality and accuracy. This model is a part of Fostex's line of professional monitors designed for both studio and home use, catering to musicians, producers, and audio engineers alike.

One of the primary features of the PM-1MKII is its compact yet powerful design. It houses a 4-inch polypropylene woofer and a 1-inch silk dome tweeter, which work together to deliver a wide frequency response. This combination ensures clear mids and highs while maintaining depth in the low-end frequencies. The monitor is capable of spanning a frequency range from 55Hz to 45kHz, providing users with a full spectrum of sound that captures the nuances in any audio mix.

The PM-1MKII's acoustic design is another standout characteristic. It employs a bass reflex system, which enhances low-frequency performance, making it ideal for genres that require robust bass response. The rear-firing bass port allows for efficient airflow, minimizing distortion and enhancing overall clarity. This design ensures that users can hear their mixes accurately, allowing for informed decisions during the mixing and mastering process.

Another notable technology integrated into the PM-1MKII is its user-friendly controls. The speaker includes a built-in volume control on the rear panel, along with a curved, bi-amped amplifier that offers specific tuning for each driver. This, paired with the monitor's high performance-to-price ratio, makes it an accessible choice for both aspiring and seasoned audio professionals.

The build quality of the Fostex PM-1MKII is also commendable, featuring a durable enclosure that helps reduce unwanted vibrations. Its sleek and modern aesthetic makes it an attractive addition to any studio setup. The compact design allows for versatile placement—whether on a desk or mounted on stands—ensuring that users can create an optimal listening environment.

In summary, the Fostex PM-1MKII stands out due to its impressive sound performance, compact design, and user-friendly features, making it an ideal choice for any audio professional. Its combination of high-quality materials and thoughtful engineering ensures that it meets the demands of serious music production and delivers exceptional results across a range of applications.