Silvercrest KH 2430 Before initial use, Electrical connection, Connection to an external ampliﬁer

Page 11

Setting up and connecting

Before initial use

The following transportation protections are attached to the device:	GB

–Plastic band for holding down the pick-up arm

–Transport screw 9 for securing the turntable

–Protective cover for the needle

–Styrofoam blocks

–Information sheet for the turntable

■Remove all packaging material and all transport protection from the device.

■Release the turntable's transport protection by tightening the transport screw 9 .

Electrical connection

Observe the following electrical connection for safe and failure free operation of the device:

■Before connecting the device compare the connection data (voltage and frequency) with that on the rating plate of your electric supply. This data must agree in order to avoid damaging the device.

■Make sure that the power cable is not damaged and is not laying over hot surfaces and/or sharp edges.

■The connection cable must not be stretched tight.

Connection to an external ampliﬁer

Connect both cinch plugs of the LINE-OUT connection cable 16 to the AUX input of an external ampliﬁer. For this follow the operating instructions for the external ampliﬁer.

USB Record Player KH 2430

13

Image 11

Contents USB Record Player GB Operating instructions Programme Audacity Operating components Maintenance Removing the cartridgeIndex Information for these operating instructions IntroductionIntroduction PrefaceInstructions Limited liabilityEnce and know-how Operator alone bears liability Proper useDamage Safety SafetyBasic Safety Instructions Package contents and transportation inspection Setting up and connectingSetting up and connecting To the power supply Safety instructionsAccording to the regionally established regulations Requirements for the setup locationDisposal of packaging Disposal technology and are therefore recyclableConnection to an external ampliﬁer Before initial useElectrical connection ‹ Click on the button Next Installation and conﬁguration of the Programme AudacityConnection to a computer Window License Agreement is shown On the button Next Installation options is shownDevice USB Audio Codec Channels 2 Stereo Installation directoryLibrary Operating components see fold out sides Operating componentsAudacity programme Starting the Audacity programme Service and operationService and operation Switching the device on and oﬀOperation during playback Setting recording level‹ Start the Audacity programme ‹ Select this menu option again to switch playback oﬀRecording with the Audacity programme ‹ Click on the button OK. The MP3 ﬁle is saved Exporting recordingsService and operation Removing the cartridge and needle MaintenanceMaintenance Installing a new needleCleaning TroubleshootingCleaning TroubleshootingTwo plugs are not touching Malfunction causes and remediesDisposing of the device AppendixStorage/Disposal StorageAppendix Technical dataImporter WarrantyPage Mail support.ie@kompernass.com USB Record Player KH