WebSTAR DPR300 Series Cable Modem Gateway User’s Guide
Setup Wireless – Basic Page Description
This section describes the section headings and fields descriptions of the Setup
Wireless – Basic page.
If you make changes in the Setup Wireless – Basic page, click Apply to apply and save your wireless basic settings.
Field Name | Description |
Service Set Identifier | The name assigned to your WAP area of coverage |
(SSID) |
|
| The SSID field should contain the product name |
| WebSTAR. |
New Channel | Allows setting a communications channel for your WAP |
| For systems with multiple WAPs, adjacently |
| located WAPs must be set to output channels that are at |
| least 2 channels apart. |
| Example: If one WAP is set to channel 1, then the |
| adjacent WAP should have a channel that is higher than |
| channel 3, for example, set to channel 4. |
| If your wireless network is not operating correctly, or if |
| external devices are interfering with your signal, try |
| selecting a different channel. |
Current Channel | Present channel the WAP is using |
Encryption Mode | Shows current encryption mode |
Firmware Version | Shows current firmware version |
62