AirCard 710/750 Network Card Installation Guide
Note: If you change GSM service providers (such as if you move to a new city), you will need a new SIM card from your new service provider. You will also need to enter your new profile information into the Watcher software (see “Config- uring Your Account” on page 23).
SIM card overview
Inserting a SIM card
To install your SIM card into the AirCard 710/750 network card, follow these steps:
1.Hold the AirCard 710/750 network card with the label on top and the antenna closest to you.
2.Locate the thin SIM card slot on the left side of the AirCard PC Card’s antenna end.
3.Orient the SIM card, as shown in the diagram on the bottom side of the AirCard.
4.Insert the end of the SIM card into the slot, and gently push it until it clicks into place.
Figure 2-1: Inserting the SIM card Into the AirCard 710/750 SIM card slot
5.Once the SIM card is properly inserted, it should not extend beyond the end of the card. See Figure
Figure 2-2: A SIM card properly inserted
Removing a SIM card
To remove the SIM card, you will need a slim object, such as the tip of a pen or a straightened paper clip, to push into the eject hole.
|
|
|
|
|
|
|
6 |
|
|
|
|
| 2130135 |
|
|
|