Sierra Wireless AirCard 750, AirCard 710 manual Windows 95 OSR 2, 98 SE, 2000, and Me

AirCard 710/750 Network Card Installation Guide

Note: Users of Windows 2000 must be logged in with adminis- trative privileges.

Windows 2000

3.Click Setup to run the Internet Connection Wizard.

4.Select the option "I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)." Click Next.

5.Select "I connect through a local area network (LAN)". Click Next.

6.In the “Local area network Internet configuration“ window, ensure no checkboxes are selected. Click Next.

Windows 95 OSR 2, 98 SE, 2000, and Me

Note: Users of Windows 95 must have Winsock2 and Dial-up Networking version 1.3 installed. These versions of the components were not included in Windows 95 OSR as it was originally shipped. You can download them from the Microsoft web site.

You must also verify that your PC card slots are enabled and that TCP/IP is installed. For instructions on installing Dial-Up Networking and TCP/IP and enabling your PC card slots, see the Windows 95 online Help (available by selecting Start > Help).

Note: You may require your Windows CD (particularly if you are using Windows 95). Ensure you have the CD before proceeding.

1.If the AirCard CD is not already in your CD-ROM drive, insert it. The CD should auto-start and display a menu.

·If the CD does not auto-start, select Start > Run and enter d:\launch.exe where d is the drive letter of your CD-ROM drive.

2.From the CD start-up menu, select notebook installation and documentation and then notebook software installation to launch the InstallShield® Wizard.

3.Use the Next and Back buttons to navigate through the wizard.

Using the default settings for the Destination Location and Program Folder is recommended unless you have special requirements and an advanced understanding of PC con- figuration.

4.If the Digital Signature Not Found window appears (this may happen several times), click Yes (to continue the instal- lation).

10 2130135